INet Tek D70 A33 (inet-a33)
Appearance
| This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken. It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually. |
|
| |
| Manufacturer | iNet Tek |
|---|---|
| Name | D70 A33 |
| Codename | inet-a33 |
| Released | 2014 |
| Type | tablet |
| Hardware | |
| Chipset | Allwinner A33 |
| CPU | Quad-Core ARM Cortex-A7 @ 1.5 GHz |
| GPU | Mali400 MP2 |
| Display | 1024x600 (7" 16:9) |
| Storage | 8 GB |
| Memory | 512 MB |
| Architecture | armv7 |
| Software | |
Original software The software and version the device was shipped with. |
Android CHANGE_ME |
Extended version The most recent supported version from the manufacturer. |
Android |
| FOSS bootloader | yes |
| postmarketOS | |
| Category | archived |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
Mainline |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
745.9 |
| Device package |
|
| Kernel package |
|
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Partial
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Partial
|
Stylus |
Untested
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Partial
|
Camera |
Partial
|
IR TX |
Untested
|
IR RX |
Untested
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Broken
|
Ethernet |
Untested
|
GPS |
Broken
|
NFC Near Field Communication |
Broken
|
| Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
| Miscellaneous | |
USB OTG USB On-The-Go or USB-C Role switching. |
Works
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Magnetometer Sensor to measure the Earth's magnetism |
Untested
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Untested
|
Proximity |
Untested
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Untested
|
Haptics |
Untested
|
Barometer Sensor to measure air pressure |
Untested
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Untested
|
Primary Bootloader Whether it is possible to replace stock bootloader with U-Boot. |
Broken
|
|---|---|
Secondary Bootloader Whether it is possible to chainload U-Boot from stock bootloader. |
Works
|
Mainline Whether latest upstream versions of U-Boot are not broken and it is possible to use them. |
Works
|
Internal Storage Whether it is possible to boot from internal storage (e.g. eMMC or UFS). |
Untested
|
SD card Whether it is possible to boot from SD card. |
Works
|
USB Host Whether it is possible to boot from a USB storage or connect a keyboard. |
Untested
|
USB Peripheral Whether it is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode. |
Untested
|
Display |
Untested
|
Keyboard |
Untested
|
Contributors
- Yourferror
Users owning this device
How to enter flash mode
Installation
Follow the Installation_guide, use sdcard method. Then insert microSD into TF-card slot and plug the power cable, pmOS should boot.
See also
https://linux-sunxi.org/Inet_D70_A33 https://forum.clockworkpi.com/t/1-2ghz-and-beyond/5253/27