Jump to content

Apple iPad 1G (apple-ipad1g)

From postmarketOS Wiki
(Redirected from IPad 1G)
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories.
This means that it cannot be selected in pmbootstrap.
Status: Can boot into a mainline linux kernel, but the bootloader isn't persistent so it can only boot tethered.
Apple iPad (1G)
TTY on iPad
TTY on iPad
Manufacturer Apple
Name iPad (1G)
Codename apple-ipad1g
Released 2010
Type tablet
Hardware
Chipset Apple A4
CPU 1x 1 GHz Cortex-A8
GPU PowerVR SGX535
Display 1024x768
Storage 16/32/64 GB
Memory 256 MB
Architecture armv7
Software
Original software iOS
Original version 3.2
postmarketOS
Category testing
Pre-built images no
Mainline yes
postmarketOS kernel 5.3.0-rc6
Features
Flashing
Partial
USB Networking
Broken
Screen
Partial
Touchscreen
Broken
Multimedia
3D Acceleration
Broken
Connectivity
WiFi
Broken
Modem
Miscellaneous
Sensors

Contributors

  • scintill

Device Owners

  • BlackEyedSquid (Notes: 16GB, boot-loop issue - dead battery)
  • ByteXD23! (Notes: 16GB, boot-loop issue, dead battery)
  • Clygro (Notes: 32GB WiFi iOS 4.3)
  • Furret (Notes: 4.3.5, 16gb cellular, blobs need dumping, jailbroken with redsn0w)
  • Konfigurare (Notes: 16 GB, very scratched)
  • KQuote03
  • Little-miss-synth (Notes: own 4 examples, 1 16gb, 1 32gb with cracked digitiser, 1 32gb without damage and one 64gb cellular unit)
  • Maxnet
  • Meowking (Notes: Cracked screen, fully usable)
  • Schrmh
  • UltrasonicMadness (Notes: Does not power on, has a significant dent on it)
  • ULumia (Notes: 3G 64 GB)


Booting

  1. Install syringe package in chroot: pmbootstrap chroot --add syringe
  2. Enter DFU mode (hold Power and Home with USB connected to computer)
  3. load openiboot
$ loadibec openiboot-ipad1g.bin

expect script for automating booting with oibc:

#!/usr/bin/expect
spawn oibc

send "!/path/to/vmlinuz\r"
sleep 0.1
send "\r"
expect "Received file"
send "kernel \"console=tty0\"\r"
expect "Done: kernel"

send "!/path/to/initramfs\r"
sleep 0.1
send "\r"
expect "Received file"
send "initrd\r"
expect "Done: initrd"
send "wait_boot 15000\r"
expect "Done: boot"
  • Set console=ttySAC0 for UART console instead of framebuffer
  • earlycon=s3c2410,0x82500000 and keep_bootcon may be useful too.

Links