Jump to content

Jolla Phone (2026) (jolla-jp2601)

From postmarketOS Wiki
(Redirected from Jolla Phone 2026 (jp2601))
Jolla Phone (2026)
Jolla Phone 2026 running Stock Sailfish OS 5.2
Jolla Phone 2026 running Stock Sailfish OS 5.2
Manufacturer Jolla
Name Phone (2026)
Codename jolla-jp2601
Released 2026
Type handset
Hardware
Chipset Mediatek Dimensity 7100 (MT6858)
Display 1032x2272 (AMOLED, 6.36”)
Storage 128/256 GB
Memory 8/12 GB
Architecture aarch64
Software
Original software
The software and version the device was shipped with.
Sailfish 5.2
Extended version
The most recent supported version from the manufacturer.
Sailfish
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
no
Features
Flashing
Whether it is possible to flash the device with pmbootstrap flasher.
Broken
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Broken
Battery
Whether charging and battery level reporting work.
Broken
Screen
Whether the display works; ideally with sleep mode and brightness control.
Broken
Touchscreen
Broken
Multimedia
3D Acceleration
Broken
Audio
Audio playback, microphone, headset and buttons.
Broken
Camera
Broken
Connectivity
WiFi
Broken
Bluetooth
Broken
GPS
Broken
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Untested
Sensors
Accelerometer
Handles automatic screen rotation in many interfaces.
Broken


Users owning this device

  • Affenull2345 (Notes: daily driver, Sailfish OS)
  • Nik012003 (Notes: Currently porting u-boot and memeline linux)

Unlocking the bootloader

The bootloader can be easily unlocked by following these steps. Note: All data on the device will be LOST.

  • Settings > Developer tools > Tick option "Enable bootloader unlocking"
  • Power off the device
  • Power it on by pressing Volume Up + Power
  • When it shows the boot menu, plug in usb
  • Select and enter fastboot with volume keys
fastboot flashing unlock
  • Follow the on-screen prompt (i.e. press Volume Up and Volume Down to confirm)
  • The device will reboot but will fail to mount root volume
  • Enter recovery mode ( Volume Up + Power ) and select Recovery
telnet 10.42.66.66
  • Type 1 and then press enter to restore the stock rom

Special boot modes

BootROM Mode

The device will enter BootROM mode when it fails to loader the preloader or the Volume Up + Volume Down are pressed simultaneously while plugging in usb.

0e8d:0003 MediaTek Inc. MT6227 phone

Preloader Mode

If preloader is reached, it will show up for about 2 seconds in lsusb.

0e8d:2000 MediaTek Inc. MT65xx Preloader

mtkclient can be used in both BootROM and Preloader Modes to load a DA (Download Agent) and reflash the device.

TODO: Test and link a working DA for dimensity 7100

Fastboot and Recovery Modes

Can be reached by pressing Volume Up while power on the device. Move in the options with the Volume Up key and confirm the selection with Volume Down.