LG Leon LTE (lg-c50)
Appearance
This page is about the dedicated port of this device. There is also an optional generic port available for this device - see Generic MSM8916 (qcom-msm8916). |
200px|alt=TODO.jpg | |
Manufacturer | LG |
---|---|
Name | Leon LTE |
Codename | lg-c50 |
Released | 2015 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 410 (MSM8916) |
CPU | Quad-core 1.2 GHz Cortex-A53 |
GPU | Adreno 306 |
Display | 480x854 |
Storage | 8 GB |
Memory | 1 GB |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android 5.0 |
Extended version The most recent supported version from the manufacturer. |
Android |
postmarketOS | |
Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Optional Generic Port | Generic MSM8916 (qcom-msm8916) |
Device package |
![]() |
Kernel package |
![]() |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Charging and battery level reporting works |
Broken
|
Screen Display works. Ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Broken
|
Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
GPS |
Broken
|
Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Broken
|
USB OTG USB On-The-Go or USB-C Role switching |
Broken
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Broken
|
Magnetometer Sensor to measure magnetism |
Broken
|
Ambient Light |
Broken
|
Hall Effect Also known as flip cover sensor |
Broken
|
This device is based on the Snapdragon 410. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
Users owning this device
Preparation
Some modifications of this device require unlocking bootloader
How to enter flash mode
NOTE: Some modifications do not have a way to enter flash mode until lk2nd is installed. |
- lk2nd Fastboot: Power on the device. After it vibrates, hold .
- lk2nd Recovery: Power on the device. After it vibrates, hold .
Installation
Download lk2nd from https://github.com/msm8916-mainline/lk2nd and flash it to the device.