Lenovo Chromebook Plus 14 (google-navi)
Appearance
| This device is unsupported by postmarketOS (most likely due to its architecture being unsupported, or limited system resources).
|
| File:Google-navi.jpg | |
| Manufacturer | Lenovo |
|---|---|
| Name | Chromebook Plus 14 |
| Codename | google-navi |
| Released | 2023 |
| Type | laptop |
| Hardware | |
| Chipset | Qualcomm Snapdragon 7c Gen 2 (SC7180) |
| CPU |
2x 2.55 GHz Kryo 468 Gold 6x 2.4 GHz Kryo 468 Silver |
| GPU | Adreno 618 |
| Display | 1920 x 1080 IPS @ 60 Hz, 14" |
| Storage | 64/128 GB eMMC |
| Memory | 8 GB |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
ChromeOS |
Extended version The most recent supported version from the manufacturer. |
ChromeOS |
| FOSS bootloader | no |
| postmarketOS | |
Pre-built images Whether pre-built images are available from the postmarketOS Installation page. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
6.x.x |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
0.0 |
Contributors
Users owning this device
How to enter flash mode
| Add step-by-step instructions for enabling flash mode. |
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernelto flash the kernel - Run
pmbootstrap flasher flash_rootfs