Lenovo K8 Note (lenovo-manning)
Appearance
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
![]() Device running pmOS with sxmo | |
Manufacturer | Lenovo |
---|---|
Name | K8 Note |
Codename | lenovo-manning |
Model | XT1902-3 |
Released | 2017 |
Type | handset |
Hardware | |
Chipset | MediaTek Helio X23 (MT6797D) |
CPU |
2x 2.3 GHz Cortex-A72 4x 1.85 GHz Cortex-A53 4x 1.4 GHz Cortex-A53 |
GPU | Mali-T880 MP4 @ 780 MHz |
Display | 1080 x 1920 IPS LCD @ 60 Hz, 16:9, 5.5" |
Storage | 32/64 GB |
Memory | 3/4 GB |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android 7.1.1 |
Extended version The most recent supported version from the manufacturer. |
Android 8 |
postmarketOS | |
Category | downstream |
Pre-built images Whether pre-built images are available from the postmarketOS Installation page. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
3.18.60 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS... |
Works
|
SD card Also includes other external storage cards. |
Untested
|
Battery Whether charging and battery level reporting work. |
Partial
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Camera Flash |
Untested
|
Connectivity | |
WiFi |
Broken
|
Bluetooth |
Untested
|
GPS |
Broken
|
Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching. |
Untested
|
Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Magnetometer Sensor to measure the Earth's magnetism |
Untested
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Untested
|
Proximity |
Untested
|
Haptics |
Untested
|
Contributors
Users owning this device
How to enter flash mode
- Hold
POWER + VOLUME_UP
. UseVOLUME_UP
to navigate through options. - Select
[Fastboot Mode]
andVOLUME_DOWN
to confirm. - From Android,
adb reboot bootloader
can be used instead of holding keys.
Installation
Using pmbootstrap
The device package has not yet been added to the postmarketOS repositories.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernel
to flash the kernel - Run
pmbootstrap flasher flash_rootfs
See also
- pmaports!6898 Initial merge request
- Downstream kernel source