Lenovo Tab P11 Pro (lenovo-j706f)

Lenovo Tab P11 Pro

Manufacturer	Lenovo
Name	Tab P11 Pro
Codename	lenovo-j706f
Released	2020
Type	tablet
Hardware
Chipset	Qualcomm Snapdragon 730G (SM7150-AB)
CPU	Octa-core (2x2.2 GHz Kryo 470 Gold & 6x1.8 GHz Kryo 470 Silver)
GPU	Adreno 618
Display	2560 x 1600 (60Hz 11.5" OLED)
Storage	128 GB
Memory	6 GB LPDDR4X
Architecture	aarch64
Software
Original software	Android
Original version	10
postmarketOS
Category	testing
Pre-built images	no

This device is marked as not booting.

Contributors

• User:MollySophia

Users owning this device

• MollySophia

How to enter flash mode

• EDL Mode: Hold down Volume Up, then connect the device to a computer with an USB cable.
• FFBM Mode: Power on the device with both Power and Volume Up buttons.
• Fastboot Mode: Power on the device with both Power and Volume Down buttons.
• Recovery Mode: Boot into Fastboot mode and select recovery using the Volume/Power buttons.

Unlocking the bootloader

Note: You have to wait at least 8 hours after initially connecting to the Internet for Lenovo to process your serial number.

1. Go to Settings → My Device, tap on ZUI Version until developer settings are enabled.
2. Go to General Settings → Developer Settings and enable "OEM Unlocking".
3. Boot into fastboot mode and connect it to a PC
4. Take note of the serial number shown on the bootloader screen.
5. Download your sn.img from http://cdn.zui.lenovomm.com/developer/tabletboot/(your_sn_number)/sn.img (Replace the brackets with your number in the link)
6. Flash your sn.img with fastboot flash unlock sn.img.
7. Unlock the bootloader with fastboot oem unlock-go

Alternatively this page can also be used to get the sn.img.

Installation

/* Not yet */

See also

• GSMArena page