MangoPi MQ-Pro (mangopi-mq-pro)
Appearance
	
	
|  A Redmi 2 accessing MangoPi MQ-Pro via SSH | |
| Manufacturer | MangoPi | 
|---|---|
| Name | MQ-Pro | 
| Codename | mangopi-mq-pro | 
| Released | 2022 | 
| Type | single board computer | 
| Hardware | |
| Chipset | Allwinner D1-H | 
| CPU | 1GHz XuanTie C906 RISC-V | 
| GPU | G2D | 
| Display | HDMI/20 Pin DSI/CTP/LVDS FPC connector | 
| Storage | microSD slot | 
| Memory | 512MB/1GB | 
| Architecture | riscv64 | 
| Software | |
| Original software The software and version the device was shipped with. | none | 
| Extended version The most recent supported version from the manufacturer. | none | 
| Optional software | Armbian,Tina Linux | 
| postmarketOS | |
| Category | testing | 
| Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. | yes | 
| pmOS kernel The kernel version that runs on the device's port. | Mainline | 
| Device package |  device-mangopi-mq-pro | 
| Kernel package |  linux-postmarketos-allwinner | 
| Flashing Whether it is possible to flash the device with  pmbootstrap flasher. | Broken | 
|---|---|
| USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). | Works | 
| Screen Whether the display works; ideally with sleep mode and brightness control. | Partial | 
| Multimedia | |
| Audio Audio playback, microphone, headset and buttons. | Broken | 
| Camera | Untested | 
| Connectivity | |
| WiFi | Broken | 
| Bluetooth | Broken | 
| Miscellaneous | |
| FDE Full disk encryption and unlocking with unl0kr. | Untested | 
| USB OTG USB On-The-Go or USB-C Role switching. | Works | 
| HDMI/DP Video and audio output with HDMI or DisplayPort. | Partial | 
| Primary Bootloader Whether it is possible to replace stock bootloader with U-Boot. | Works | 
|---|---|
| Mainline Whether latest upstream versions of U-Boot are not broken and it is possible to use them. | Works | 
| SD card Whether it is possible to boot from SD card. | Works | 
| USB Host Whether it is possible to boot from a USB storage or connect a keyboard. | Works | 
| USB Peripheral Whether it is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode. | Works | 
| Display | Broken | 
Maintainer(s)
Contributors
Users owning this device
How to enter flash mode
Installation
Use pmbootstrap to install pmOS to a microSD card.
$ pmbootstrap init
$ pmbootstrap install --sdcard=/dev/sdX
Notes
Gallery
- 
			
			MangoPi MQ-Pro running Xfce4
See also
- pmaports!3761 Initial merge request
- linux-sunxi wiki page
 device-mangopi-mq-pro device-mangopi-mq-pro
 linux-postmarketos-allwinner-d1 linux-postmarketos-allwinner-d1
