Meizu Pro 5 (meizu-turbo)

From postmarketOS
(Redirected from Meizu-turbo)
Meizu Pro 5
Manufacturer Meizu
Name Pro 5
Codename meizu-turbo
Released 2015
Category testing
Pre-built images no
Original software Ubuntu Touch
Hardware
Chipset Samsung Exynos 7420 Octa
CPU Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)
GPU Mali-T760 MP8
Display 1080x1920 AMOLED
Storage 32/64 GB
Memory 3/4 GB
Architecture AArch64
Type handset
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Works
Display
Works
WiFi
FDE
Mainline
Battery
3D Acceleration
Audio
Bluetooth
Camera
GPS
Mobile data
Internal storage
SMS
Calls
USB OTG
NFC
Sensors
Accelerometer
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Built-in DVB
Camera Flash
Keyboard
Touchpad
USB-A
HDMI/DP
Ir TX
Ir RX
Stylus
Memory Card
Haptics
Ethernet
FOSS bootloader


Contributors

elelel

Maintainer(s)

How to enter flash mode

The device has to be with unlocked bootloader. Android phone version has bootloader locked by default. Locked bootloader may be unlocked with a Beta FlymeOS image for the international phone version. International firmware can be flashed to Chinese phone if one changes phone's id (possible with a 5.1.x Chinese firmware, root and a hex editor).


Press volume down and power while turning on to get into fastboot mode.

Installation

Current pmbootstrap utility assumes that boot partition is always named 'boot' on fastboot devices. This device's boot partition has 'bootimg' label. Because of that boot partition must be either flashed directly with fastboot utility, or pmbootstrap config source code has to be fixed.

Status

Currently when turned on, the device enters reboot loop. The reboot is triggered by the line:

udevadm trigger --type=devices --action=add

The device is accessible with telnet hook and via SSH (after additional procedure)

In order to workaround this problem you can compile a custom eudev package with this patch: https://github.com/elelel/eudev/commit/f27656ae371c0da23346cdccbd3dc28cf38d2794 ...and install it on the system

Current aport does not contain firmware blobs. Adding them might fix the eudev problem.

Getting device to boot in spite of uedev

Install PostmarketOS's telnet debug hook, log on with telnet, then execute:

. init_functions.sh
mount_boot_partition
extract_initramfs_extra /boot/initramfs-*-extra
start_charging_mode
wait_root_partition
resize_root_partition
unlock_root_partition
resize_root_filesystem
mount_root_partition
mount -o remount,rw /dev/mapper/sda41p2 /sysroot
mount -t proc proc /sysroot/proc
mount -t sysfs sys /sysroot/sys
chroot /sysroot


If you want just to boot to SSH, in chroot, comment out the offendig string, e.g. with sed replace or vi in /etc/init.d/udev-trigger.rc

udevadm trigger --type=devices --action=add

If you want to make the device boot to UI as normal, you should install patched eudev package (see above) at this point and reboot.

Development notes

Kernels

There are several candidate kernels for the port:

  1. Official kernel sources
    1. Android branch. This branch seem to contain the very first kernel used for the earliest FlymeOS 4.x ROM. It is reported to be uncomplete, in particular, it misses Meizu proprietary sources for power management.
    2. Ubuntu branch. This branch seem to contain kernell for Android release updated to 3.10.100 in commit f866ad068f11fb5e68ff87901346483945972ae9. After that Ubuntu-specific patches as well as generic bugfixes come.
    3. Android 7 kernel, not released. Kernels from previous two links were only used in very early official ROMs. Later kernel sources were not realeased. There is a Github issue requesting the release. Meizu is known to respond positively to such issues.
  2. Unofficial sources
    1. UBPorts kernel. Based on Meizu Pro 5 branch. Contains Ubuntu Touch fixes and ports, mainly Android binder and anbox-specific patches.
    2. faust93's kernel. Kernel used in at least two unofficial Android roms. This kernel, probably based on CM14.1, seems to be most up to date candidate, but contains a lot of patches from assorted sources and may be not very stable


See also