Motorola Moto One Hyper (motorola-def)
[[|200px|alt=image not yet available]]|
image not yet available
|Name||Moto One Hyper|
|Original software||Android 10|
|Chipset||Qualcomm SM6150 Snapdragon 675|
|CPU||2.0GHz Kryo 460 x2, 1.7GHz Kryo 460 x6|
Users owning this device
- Ky0ko (Notes: This is my primary phone)
How to enter flash mode
Hold volume down while powering on the device. Release power once you see anything on screen.
This device has only been tested with rootfs on sd card, booted via USB with 'pmbootstrap flasher boot'.
You will need an unlocked bootloader. You can follow the instructions on Motorola's website to do this.
Touch panel is from from Focaltech, but does not seem to be supported by CONFIG_TOUCHSCREEN_EDT_FT5X06. Downstream stock rom's kernel uses an out-of-tree module called focaltech_mmi to support the touch panel.
Wireless seems to be a new generation of atheros not supported by the existing CNSS/QCA in-kernel driver. Downstream stock rom's kernel uses an out-of-tree module called qca_cld3_wlan.
- pmaports!1023 Initial merge request