Motorola Moto G5s (motorola-montana)
Appearance
Manufacturer | Motorola |
---|---|
Name | Moto G5s |
Codename | motorola-montana |
Released | 2017 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 430 (MSM8937) |
CPU | Octa-core 1.4Ghz Cortex-A53 |
GPU | Adreno 505 |
Display | 1080x1920 IPS |
Storage | 32 GB |
Memory | 3 GB |
Architecture | aarch64 |
Software | |
Original software | Android |
Original version | 7.1 (Linux 3.18.31) |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage | |
SD card | |
Battery |
Broken |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
Works |
Audio |
Broken |
Camera |
Broken |
Camera Flash | |
Connectivity | |
WiFi |
Partial |
Bluetooth |
Partial |
GPS |
Broken |
NFC | |
Modem | |
Calls |
Broken |
SMS |
Broken |
Mobile data |
Broken |
Miscellaneous | |
FDE |
Works |
USB OTG | |
HDMI/DP | |
Sensors | |
Accelerometer |
Broken |
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Haptics | |
Barometer | |
Contributors
- kubast2
- DolphinChips
Maintainer(s)
Users owning this device
- DolphinChips (Notes: Current daily driver)
- Lexpdev (Notes: not turning on, probably bricked)
- Xproot (Notes: (2GB/32GB) Battery really degraded. Doesn't have pmOS installed)
Issues
- Phone gets stuck somewhere when shutting down when using Nougat firmware
- X11 doesn't work (requires kernel patching)
How to enter flash mode
Power
+ Volume Down
buttons or use adb reboot bootloader
Installation
- Follow the Installation guide and your device wiki page.
Warning: Flashing lk2nd is required, as it is a hard dependency. Without it the mainline kernel will not select the display panel (resulting in black screen on boot). |
$ pmbootstrap init # choose Vendor: qcom Device codename: msm89x7
$ pmbootstrap install
$ pmbootstrap flasher flash_lk2nd
$ pmbootstrap flasher flash_rootfs
WiFi/BT
Wifi is not supported by default because system partition contains the WCNSS_qcom_wlan_nv.bin.
Copy WCNSS_qcom_wlan_nv.bin to /lib/firmware/postmarketos/wlan/prima/WCNSS_qcom_wlan_nv.bin
See also
- pmaports!286 Initial merge request
- pmaports!581 Change arch to aarch64
- pmaports#352 Issue about broken touchscreen