Motorola Photon Q (motorola-asanti)
| Manufacturer | Motorola |
|---|---|
| Name | Photon Q |
| Codename | motorola-asanti |
| Released | 2012 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon S4 Plus (MSM8960) |
| CPU | Dual-core (2x 1.7GHz Krait 200) |
| GPU | Adreno 220 |
| Display | 540x960 |
| Storage | 8/16 GB |
| Memory | 1 GB |
| Architecture | armv7 |
| Software | |
| Original software | Android |
| Original version | 4.0.4 |
| Extended version | 4.1.2 |
| postmarketOS | |
| Category | testing |
| Pre-built images | no |
This device is marked as not booting.
This page documents the status of mainline Linux on the Motorola Photon Q (XT897)!
How to enter flash mode
Hold Power and Volume Down until the notification LED blinks, then release power and the device will boot into fastboot
Fastboot
Install fastboot on your host, refer to Google for instructions.
Unlock the bootloader
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Info
Downstream dmesg
dmesg
<6>[ 0.000000,0] Booting Linux on physical CPU 0
<6>[ 0.000000,0] Initializing cgroup subsys cpu
<5>[ 0.000000,0] Linux version 3.0.101-ge4a10e7-dirty (jenkins@build) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Apr 5 09:51:32 EDT 2016
<4>[ 0.000000,0] CPU: ARMv7 Processor [511f04d4] revision 4 (ARMv7), cr=10c5387d
<4>[ 0.000000,0] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[ 0.000000,0] Machine: msm8960dt
<6>[ 0.000000,0] mot_parse_atag_baseband: msm8960-svlte-B1.B2D.B5.C0.C1D.C10D.L25D
<6>[ 0.000000,0] mot_parse_atag_display: mipi_mot_cmd_auo_qhd_430
<4>[ 0.000000,0] parse_tag_bl_build_sig: sbl1.git=MBM-NG-V10.9B-4-g22c28ae
<4>[ 0.000000,0] parse_tag_bl_build_sig: sbl2.git=MBM-NG-V10.9B-4-g22c28ae
<4>[ 0.000000,0] parse_tag_bl_build_sig: sbl3.git=MBM-NG-V10.9B-4-g22c28ae
<4>[ 0.000000,0] parse_tag_bl_build_sig: rpm.git=MBM-NG-V10.9B-2-gd04dd7f
<4>[ 0.000000,0] parse_tag_bl_build_sig: tz.git=MBM-NG-V10.9B-1-gb543dba
<4>[ 0.000000,0] parse_tag_bl_build_sig: aboot.git=MBM-NG-V10.9B-5-g51ba9a3
<4>[ 0.000000,0] parse_tag_powerup_reason: powerup reason=0x00000010
<6>[ 0.000000,0] parse_tag_mbm_version: mbm_version=0x0000109b
<6>[ 0.000000,0] mot_parse_atag_mbm_protocol_version: 0x1
<6>[ 0.000000,0] flat_dev_tree_address=0x88496504, flat_dev_tree_size == 0x000018D4
<4>[ 0.000000,0] Ignoring unrecognised tag 0xf1000417
<6>[ 0.000000,0] low unstable address b0000000 max size 10000000 bank size 20000000
<6>[ 0.000000,0] movable zone start b0000000 size 10000000
<6>[ 0.000000,0] memory pool 3 (start af300000 size b00000) initialized
<4>[ 0.000000,0] Memory policy: ECC disabled, Data cache writealloc
<6>[ 0.000000,0] socinfo_init: v6, id=87, ver=4.1, raw_id=1713, raw_ver=7, hw_plat=0, hw_plat_ver=65536
<6>[ 0.000000,0] accessory_chip=0 hw_plat_subtype=0
<4>[ 0.000000,0] Zone PFN ranges:
<4>[ 0.000000,0] Normal 0x00080200 -> 0x000a7900
<4>[ 0.000000,0] HighMem 0x000a7900 -> 0x000c0000
<4>[ 0.000000,0] Movable zone start PFN for each node
<4>[ 0.000000,0] Node 0: 699392
<4>[ 0.000000,0] early_node_map[6] active PFN ranges
<4>[ 0.000000,0] 0: 0x00080200 -> 0x00088e00
<4>[ 0.000000,0] 0: 0x0008d100 -> 0x0008d400
<4>[ 0.000000,0] 0: 0x0008ec00 -> 0x0008f200
<4>[ 0.000000,0] 0: 0x0008f800 -> 0x0008fa00
<4>[ 0.000000,0] 0: 0x00090000 -> 0x000af300
<4>[ 0.000000,0] 0: 0x000b4a02 -> 0x000c0000
<7>[ 0.000000,0] On node 0 totalpages: 212990
<7>[ 0.000000,0] Normal zone: 1262 pages used for memmap
<7>[ 0.000000,0] Normal zone: 0 pages reserved
<7>[ 0.000000,0] Normal zone: 133906 pages, LIFO batch:31
<7>[ 0.000000,0] HighMem zone: 102 pages used for memmap
<7>[ 0.000000,0] HighMem zone: 12954 pages, LIFO batch:3
<7>[ 0.000000,0] Movable zone: 680 pages used for memmap
<7>[ 0.000000,0] Movable zone: 64086 pages, LIFO batch:15
<6>[ 0.000000,0] allocating 17326080 bytes at c1c6b000 (81e6b000 physical) for fb
<6>[ 0.000000,0] allocating 131072 bytes at afde0000 for RAM console
<6>[ 0.000000,0] Unflattening device tree: 0xc2cf1000
<6>[ 0.000000,0] PERCPU: Embedded 8 pages/cpu @c2cf8000 s9920 r8192 d14656 u32768
<7>[ 0.000000,0] pcpu-alloc: s9920 r8192 d14656 u32768 alloc=8*4096
<7>[ 0.000000,0] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000,0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 210946
<5>[ 0.000000,0] Kernel command line: oops=panic console=null androidboot.hardware=qcom user_debug=31 loglevel=1 androidboot.emmc=true androidboot.serialno=T025701TIB androidboot.baseband=msm androidboot.mode=normal androidboot.bootloader=0x109B battery= mot_sst=0 androidboot.carrier=sprint
<6>[ 0.000000,0] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000,0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000,0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000,0] Memory: 140MB 3MB 6MB 2MB 499MB 181MB = 831MB total
<5>[ 0.000000,0] Memory: 806496k/806496k available, 134560k reserved, 311288K highmem
<5>[ 0.000000,0] Virtual kernel memory layout:
<5>[ 0.000000,0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000,0] timers : 0xfffef000 - 0xffff0000 ( 4 kB)
<5>[ 0.000000,0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000,0] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
<5>[ 0.000000,0] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB)
<5>[ 0.000000,0] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB)
<5>[ 0.000000,0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000,0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000,0] .init : 0xc0008000 - 0xc0053000 ( 300 kB)
<5>[ 0.000000,0] .text : 0xc0053000 - 0xc0b51128 (11257 kB)
<5>[ 0.000000,0] .data : 0xc0b52000 - 0xc0c13200 ( 773 kB)
<5>[ 0.000000,0] .bss : 0xc0c13224 - 0xc0ee8f6c (2904 kB)
<6>[ 0.000000,0] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000,0] Preemptible hierarchical RCU implementation.
<6>[ 0.000000,0] NR_IRQS:817
<6>[ 0.000000,0] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
<6>[ 0.150160,0] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67681)
<6>[ 0.150190,0] pid_max: default: 32768 minimum: 301
<6>[ 0.150404,0] Security Framework initialized
<6>[ 0.150404,0] SELinux: Initializing.
<7>[ 0.150495,0] SELinux: Starting in permissive mode
<6>[ 0.150587,0] Mount-cache hash table entries: 512
<6>[ 0.153029,0] Initializing cgroup subsys debug
<6>[ 0.153059,0] Initializing cgroup subsys cpuacct
<6>[ 0.153120,0] Initializing cgroup subsys freezer
<6>[ 0.153120,0] Initializing cgroup subsys bfqio
<6>[ 0.153242,0] CPU: Testing write buffer coherency: ok
<6>[ 0.153547,0] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
<6>[ 0.153609,0] Setting up static identity map for 0x80a2ed08 - 0x80a2ed44
<4>[ 0.156294,1] CPU1: Booted secondary processor
<6>[ 0.160292,0] Brought up 2 CPUs
<6>[ 0.160292,0] SMP: Total of 2 processors activated (27.07 BogoMIPS).
<6>[ 0.174271,0] print_constraints: dummy:
<3>[ 0.174362,0] rdev_init_debugfs: Error-Bad Function Input
<6>[ 0.174607,0] NET: Registered protocol family 16
<3>[ 0.174759,0] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
<6>[ 0.176621,0] meminfo_init: smem ram ptable found: ver: 0 len: 5
<6>[ 0.176651,0] Found 1 memory banks grouped into 8 memory regions
<6>[ 0.176682,0] msm_tsens_early_init: done
<6>[ 0.176682,0] msm_rpm_init: RPM firmware 3.0.16843780
<6>[ 0.176835,0] Android kernel panic mmc handler initialized
<6>[ 0.176987,0] EMU detection IC: A1, UART@GSBI4, resources 12, accy.support: FULL
<6>[ 0.195116,0] rcg_clk_handoff: gsbi10_qup_clk rate=24000000
<6>[ 0.195177,0] rcg_clk_handoff: sdc1_clk rate=48000000
<6>[ 0.195208,0] rcg_clk_handoff: dsi1_byte_clk rate=1
<6>[ 0.195238,0] rcg_clk_handoff: dsi1_esc_clk rate=2
<6>[ 0.195269,0] rcg_clk_handoff: mdp_clk rate=200000000
<6>[ 0.195574,0] mot_gpiomux_init: no node found: /System@0/IOMUX@0
<6>[ 0.195605,0] DT Hot Temp = 55
<6>[ 0.195635,0] DT Hot Temp Offset = 5
<6>[ 0.195635,0] DT Hot Temp PCB = 63
<6>[ 0.195666,0] DT Hot Temp Offset PCB = -2
<6>[ 0.196184,0] vib_of_init pwm len 128 size 8
<6>[ 0.196215,0] mmi_vibrator_init vibrator type 0x17 min 15 max 30000
<6>[ 0.198016,0] saw_probe: id=0, name=8921_s5
<6>[ 0.198351,0] saw_probe: id=1, name=8921_s6
<6>[ 0.198657,0] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
<6>[ 0.198931,0] pm8921_probe: PMIC revision 1: F4
<6>[ 0.198931,0] pm8921_probe: PMIC revision 2: 06
<6>[ 0.198962,0] pm8921_probe: PMIC version: PM8921 rev 3.0
<6>[ 0.198962,0] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
<6>[ 0.200824,0] pm_gpio_probe: OK: base=152, ngpio=44
<6>[ 0.201159,0] pm8xxx_mpp_probe: OK: base=196, ngpio=12
<6>[ 0.206714,0] ram_console: got buffer at afde0000, size 20000
<6>[ 0.206836,0] ram_console: uncorrectable error in header
<6>[ 0.206867,0] ram_console: no valid data in buffer (sig = 0xacaabf02)
<6>[ 0.206928,0] console [ram-1] enabled
<6>[ 0.210254,0] mot_init_factory_kill: Factory Kill Circuit: enabled
<6>[ 0.219410,0] select_freq_plan: ACPU PVS: Fast
<6>[ 0.219502,0] select_freq_plan: Max ACPU freq: 1512000 KHz
<6>[ 0.223012,0] cpufreq_table_init: CPU0: 12 scaling frequencies supported.
<6>[ 0.223103,0] cpufreq_table_init: CPU1: 12 scaling frequencies supported.
<3>[ 0.224385,0] mmi_unit_info (SMEM): version = 0x01, system_rev = 0x000082b0, system_serial = 0x00010002095e7fcd, machine = 'msm8960dt', barcode = 'T025701TIB', baseband = 'msm8960-svlte-B1.B2D.B5.C0.C1D.C10D.L25D', carrier = 'sprint'
<6>[ 0.227132,0] sps:REVISION of BAM 0xe1828000 is 0x5.
<6>[ 0.227804,0] sps is ready.
<6>[ 0.229574,0] iommu_dev: device vpe mapped at e1c00000, with 2 ctx banks
<6>[ 0.229818,0] iommu_dev: device mdp0 mapped at e1e00000, with 2 ctx banks
<6>[ 0.230032,0] iommu_dev: device mdp1 mapped at e2000000, with 2 ctx banks
<6>[ 0.230215,0] iommu_dev: device rot mapped at e2200000, with 2 ctx banks
<6>[ 0.230459,0] iommu_dev: device ijpeg mapped at e2400000, with 2 ctx banks
<6>[ 0.230672,0] iommu_dev: device vfe mapped at e2600000, with 2 ctx banks
<6>[ 0.230856,0] iommu_dev: device vcodec_a mapped at e2800000, with 2 ctx banks
<6>[ 0.231069,0] iommu_dev: device vcodec_b mapped at e2a00000, with 2 ctx banks
<6>[ 0.231344,0] iommu_dev: device gfx3d mapped at e2c00000, with 3 ctx banks
<6>[ 0.231527,0] iommu_dev: device jpegd mapped at e2e00000, with 2 ctx banks
<6>[ 0.231802,0] iommu_dev: device gfx2d0 mapped at e3000000, with 2 ctx banks
<6>[ 0.231985,0] iommu_dev: device gfx2d1 mapped at e3200000, with 2 ctx banks
<6>[ 0.232290,0] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
<6>[ 0.232534,0] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
<6>[ 0.232748,0] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
<6>[ 0.232962,0] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
<6>[ 0.233175,0] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
<6>[ 0.233419,0] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
<6>[ 0.233663,0] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
<6>[ 0.233847,0] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
<6>[ 0.234091,0] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
<6>[ 0.234335,0] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
<6>[ 0.234549,0] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
<6>[ 0.234793,0] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
<6>[ 0.235006,0] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
<6>[ 0.235251,0] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
<6>[ 0.235495,0] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
<6>[ 0.235708,0] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
<6>[ 0.235983,0] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
<6>[ 0.236227,0] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
<6>[ 0.236410,0] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
<6>[ 0.236685,0] msm_iommu_ctx msm_iommu_ctx.19: context gfx2d0_2d0 using bank 0
<6>[ 0.236929,0] msm_iommu_ctx msm_iommu_ctx.20: context gfx2d1_2d1 using bank 0
<6>[ 0.249259,0] bio: create slab <bio-0> at 0
<6>[ 0.249717,0] ION heap vmalloc created
<6>[ 0.249809,0] ION heap mm created at b0200000 with size 4800000
<6>[ 0.249870,0] ION heap mm_fw created at b0000000 with size 200000
<6>[ 0.249992,0] ION heap mfc created at b4a00000 with size 2000
<6>[ 0.250053,0] ION heap iommu created
<6>[ 0.250206,0] ION heap qsecom created at af303000 with size 380000
<6>[ 0.250267,0] ION heap audio created at af683000 with size 4cf000
<5>[ 0.250877,0] pm8xxx_pwm_probe: OK
<5>[ 0.251182,0] SCSI subsystem initialized
<6>[ 0.251365,0] sps:REVISION of BAM 0xe1834000 is 0x12.
<6>[ 0.252128,0] usbcore: registered new interface driver usbfs
<6>[ 0.252220,0] usbcore: registered new interface driver hub
<6>[ 0.252403,0] usbcore: registered new device driver usb
<7>[ 0.252769,0] Registered led device: charging
<6>[ 0.253197,1] slimbus:1 laddr:0x0, EAPC:0x1:0x1
<6>[ 0.253288,1] slimbus:1 laddr:0x1, EAPC:0x0:0x1
<6>[ 0.253502,1] slimbus:1 laddr:0x2, EAPC:0x5:0x1
<7>[ 0.253654,0] Registered led device: shift-key-light
<6>[ 0.254539,0] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.254936,0] Bluetooth: Core ver 2.16
<6>[ 0.255028,0] NET: Registered protocol family 31
<6>[ 0.255150,0] Bluetooth: HCI device and connection manager initialized
<6>[ 0.255211,0] Bluetooth: HCI socket layer initialized
<6>[ 0.255302,0] Bluetooth: L2CAP socket layer initialized
<6>[ 0.255486,0] Bluetooth: SCO socket layer initialized
<6>[ 0.255699,0] Switching to clocksource gp_timer
<6>[ 0.270349,0] NET: Registered protocol family 2
<6>[ 0.270532,0] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.270898,0] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.271753,0] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 0.272180,0] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.272302,0] TCP reno registered
<6>[ 0.272363,0] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.272485,0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.272821,0] NET: Registered protocol family 1
<6>[ 0.273187,0] RPC: Registered named UNIX socket transport module.
<6>[ 0.273248,0] RPC: Registered udp transport module.
<6>[ 0.273340,0] RPC: Registered tcp transport module.
<6>[ 0.273401,0] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.273676,0] Trying to unpack rootfs image as initramfs...
<6>[ 0.462108,0] Freeing initrd memory: 4520K
<6>[ 0.462383,0] PMU: registered new PMU device of type 0
<6>[ 0.462597,0] PMU: registered new PMU device of type 1
<6>[ 0.463146,1] msm_etb msm_etb: ETB initialized
<6>[ 0.463329,1] msm_tpiu msm_tpiu: TPIU initialized
<6>[ 0.463543,1] msm_funnel msm_funnel: FUNNEL initialized
<6>[ 0.465069,0] msm_etm msm_etm: ETM initialized
<6>[ 0.465191,0] QDSS initialized
<6>[ 0.466076,0] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
<6>[ 0.466992,0] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
<6>[ 0.467846,0] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
<6>[ 0.468762,0] pil_riva pil_riva: using non-secure boot
<3>[ 0.470471,0] smd_channel_probe_worker: allocation table not initialized
<6>[ 0.474103,0] msm_dsps driver version 3.03.
<6>[ 0.474713,0] NET: Registered protocol family 27
<6>[ 0.475171,0] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
<6>[ 0.476484,0] modem_8960_init: modem fatal driver init'ed.
<6>[ 0.476636,0] lpass_fatal_init: lpass SSR driver init'ed.
<6>[ 0.476850,0] wcnss_8960: module initialized
<6>[ 0.478467,0] audit: initializing netlink socket (disabled)
<5>[ 0.478559,0] type=2000 audit(7.635:1): initialized
<4>[ 0.553395,0] highmem bounce pool size: 64 pages
<6>[ 0.553609,0] ashmem: initialized
<6>[ 0.560750,0] fuse init (API version 7.16)
<6>[ 0.561422,0] msgmni has been set to 976
<7>[ 0.561513,0] SELinux: Registering netfilter hooks
<6>[ 0.563161,0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
<6>[ 0.563222,0] io scheduler noop registered
<6>[ 0.563345,0] io scheduler deadline registered (default)
<6>[ 0.563406,0] io scheduler row registered
<6>[ 0.563558,0] io scheduler cfq registered
<6>[ 0.563772,0] io scheduler bfq registered
<6>[ 0.563833,0] BFQ I/O-scheduler: v7r8
<6>[ 0.563955,0] io scheduler sio registered
<6>[ 0.564596,0] lm3532_bl 10-0038: Revision F4 backlight
<6>[ 0.564718,0] lm3532_led_probe: control = 1
<6>[ 0.564840,0] lm3532_bl 10-0038: Registering keyboard-backlight LED class
<7>[ 0.564932,0] Registered led device: keyboard-backlight
<6>[ 0.567251,0] lm3532_probe: finished
<6>[ 0.568411,0] mipi_dsi base phy_addr = 0x4700000 virt = 0xe3400000
<6>[ 0.568533,0] mmss_sfpb base phy_addr = 0x5700000,virt = 0xe1874000
<4>[ 0.568808,0] msm_fb_detect_panel: not supported 'mipi_mot_cmd_auo_hd_450'
<4>[ 0.568899,0] msm_fb_detect_panel: not supported 'mipi_mot_video_smd_hd_465'
<6>[ 0.569021,0] msm_fb_detect_panel: detected mipi_mot_cmd_auo_qhd_430
<6>[ 0.569388,0] setting pdata->panel_info.fb_num to 3. type: 9
<6>[ 0.580253,0] FrameBuffer[0] 540x960 size=6266880 bytes is registered successfully!
<4>[ 0.580650,0] msm_fb_detect_panel: not supported 'mipi_mot_cmd_smd_qhd_429'
<6>[ 0.581382,0] setting pdata->panel_info.fb_num to 1. type: 7
<6>[ 0.582115,0] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
<6>[ 0.582389,0] mdp4_dtv_vsync_init: ndx=0
<3>[ 0.582511,0] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group e09ea808
<6>[ 0.582633,0] hdmi_msm hdmi_msm.1: HDMI HPD: ON
<3>[ 0.686403,0] Video format is : 15
<6>[ 0.686830,0] setting pdata->panel_info.fb_num to 1. type: 10
<3>[ 0.687013,0] Inside writeback_driver_init
<3>[ 0.687227,0] Inside writeback_probe
<6>[ 0.687715,0] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
<6>[ 0.688631,0]
<6>[ 0.688631,0] msm_vidc_enc: Inside vid_enc_init()
<6>[ 0.688905,0]
<6>[ 0.688905,0] msm_vidc_enc: Inside vid_enc_vcd_init()
<6>[ 0.689424,0] msm_serial: driver initialized
<6>[ 0.689729,0] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
<6>[ 0.726201,0] msm_serial_hs.1: ttyHS1 at MMIO 0x16340000 (irq = 184) is a MSM HS UART
<6>[ 0.826125,0] msm_serial_hs module loaded
<6>[ 0.826308,0] msm_serial_hsl: detected port #0
<6>[ 0.826430,0] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM
<3>[ 0.826552,0] msm_hsl_power(): Error setting UART clock rate to zero.
<6>[ 0.916282,0] msm_serial_hsl: driver initialized
<6>[ 0.917320,0] msm_rotator_probe: rotator_hw_revision=2
<6>[ 0.918113,0] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
<6>[ 0.919090,0] kgsl kgsl-2d0: |kgsl_iommu_init| MMU type set for device is IOMMU
<6>[ 0.919761,0] kgsl kgsl-2d1: |kgsl_iommu_init| MMU type set for device is IOMMU
<6>[ 0.923699,0] brd: module loaded
<6>[ 0.925469,0] loop: module loaded
<6>[ 0.925835,0] zram: Created 1 device(s) ...
<4>[ 0.926567,0] TZCOM: Enabled clock
<6>[ 0.927422,0] Inserting sec module
<6>[ 0.927544,0] tabla-slim tabla-slim: Platform data from board file
<6>[ 0.957179,0] slimbus:1 laddr:0x3, EAPC:0x1:0x60
<6>[ 0.957332,0] slimbus:1 laddr:0x4, EAPC:0x0:0x60
<3>[ 1.086250,0] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
<6>[ 1.088936,0] tabla2x-slim tabla2x-slim: Platform data from board file
<6>[ 1.152144,0] wcd9xxx_check_codec_type: codec is tabla_codec
<6>[ 1.152235,0] wcd9xxx_check_codec_type: Read codec idbytes & version
<6>[ 1.152235,0] byte_0[00000002] byte_1[00000000] byte_2[00000000]
<6>[ 1.152266,0] byte_3[00000001] version = 2
<4>[ 1.152998,0] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[ 1.153090,0] i2c-core: driver [tabla-i2c-core] using legacy resume method
<6>[ 1.153670,0] Loading pn544 driver
<6>[ 1.153731,0] pn544_probe : Probing pn544 driver
<6>[ 1.153883,0] pn544_probe : PN544 Misc Minor: 26
<6>[ 1.154005,0] pn544_probe : requesting IRQ 394
<6>[ 1.154494,0] SCSI Media Changer driver v0.25
<6>[ 1.155165,0] PPP generic driver version 2.4.2
<6>[ 1.155379,0] PPP Deflate Compression module registered
<6>[ 1.155440,0] PPP BSD Compression module registered
<6>[ 1.156081,0] PPP MPPE Compression module registered
<6>[ 1.156142,0] NET: Registered protocol family 24
<6>[ 1.156264,0] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[ 1.156325,0] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.156722,0] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.156844,0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.157515,0] usbcore: registered new interface driver asix
<6>[ 1.157637,0] usbcore: registered new interface driver cdc_ether
<6>[ 1.157729,0] usbcore: registered new interface driver net1080
<6>[ 1.157881,0] usbcore: registered new interface driver cdc_subset
<6>[ 1.157973,0] usbcore: registered new interface driver zaurus
<6>[ 1.158126,0] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[ 1.158187,0] cdc_ncm: 04-Aug-2011
<6>[ 1.158309,0] usbcore: registered new interface driver cdc_ncm
<6>[ 1.158431,0] usbcore: registered new interface driver rmnet_usb
<6>[ 1.158797,0] rmnet usb ctrl Initialized.
<6>[ 1.158919,0] wcnss_wlan probed in built-in mode
<6>[ 1.159285,0] rmnet_init: BAM devices[8]
<6>[ 1.162093,0] msm_otg msm_otg: msm_otg probe
<6>[ 1.162185,0] msm_otg msm_otg: OTG regs = e18a8000
<6>[ 1.164626,0] msm_otg_probe: MSM OTG Driver will operate in ACCY CONTROL mode
<6>[ 1.164687,0] msm_otg_init_sm: setting default inputs for ACCY mode
<6>[ 1.165176,0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.165634,0] usbcore: registered new interface driver cdc_acm
<6>[ 1.165756,0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 1.165878,0] usbcore: registered new interface driver usblp
<6>[ 1.165939,0] Initializing USB Mass Storage driver...
<6>[ 1.166091,0] usbcore: registered new interface driver usb-storage
<6>[ 1.166152,0] USB Mass Storage support registered.
<6>[ 1.166336,0] usbcore: registered new interface driver ums-alauda
<6>[ 1.166427,0] usbcore: registered new interface driver ums-cypress
<6>[ 1.166580,0] usbcore: registered new interface driver ums-datafab
<6>[ 1.166671,0] usbcore: registered new interface driver ums-freecom
<6>[ 1.166793,0] usbcore: registered new interface driver ums-isd200
<6>[ 1.166915,0] usbcore: registered new interface driver ums-jumpshot
<6>[ 1.167037,0] usbcore: registered new interface driver ums-karma
<6>[ 1.167129,0] usbcore: registered new interface driver ums-onetouch
<6>[ 1.167282,0] usbcore: registered new interface driver ums-sddr09
<6>[ 1.167373,0] usbcore: registered new interface driver ums-sddr55
<6>[ 1.167526,0] usbcore: registered new interface driver ums-usbat
<6>[ 1.167739,0] usbcore: registered new interface driver usbserial
<6>[ 1.167801,0] usbserial: USB Serial Driver core
<6>[ 1.167862,0] USB Serial support registered for Qualcomm USB modem
<6>[ 1.168014,0] usbcore: registered new interface driver qcserial
<6>[ 1.168167,0] usbcore: registered new interface driver usb_ehset_test
<6>[ 1.168258,0] usbcore: registered new interface driver diag_bridge
<6>[ 1.168441,0] usbcore: registered new interface driver mdm_bridge
<6>[ 1.169082,0] msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
<6>[ 1.170334,0] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.170395,0] android_usb gadget: Number of LUNs=1
<6>[ 1.170517,0] lun0: LUN: removable file: (no medium)
<6>[ 1.171066,0] android_usb gadget: android_usb ready
<6>[ 1.172226,0] diagchar initialized now
<6>[ 1.172409,0] mousedev: PS/2 mouse device common for all mice
<7>[ 1.172714,0] gpio_set_debounce: gpio-184 status -22
<7>[ 1.172897,0] gpio_set_debounce: gpio-11 status -22
<6>[ 1.173111,0] input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>[ 1.173233,0] added keypad filter to input dev gpio-keys
<6>[ 1.174362,0] input: keypad_8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
<6>[ 1.174423,0] added keypad filter to input dev keypad_8960
<6>[ 1.174759,0] usbcore: registered new interface driver xpad
<6>[ 1.174881,0] usbcore: registered new interface driver usb_acecad
<6>[ 1.174973,0] acecad: v3.2:USB Acecad Flair tablet driver
<6>[ 1.175064,0] usbcore: registered new interface driver aiptek
<6>[ 1.175186,0] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[ 1.175278,0] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[ 1.175400,0] usbcore: registered new interface driver gtco
<4>[ 1.175492,0] GTCO usb driver version: 2.00.0006
<6>[ 1.175583,0] usbcore: registered new interface driver hanwang
<6>[ 1.175797,0] usbcore: registered new interface driver kbtab
<6>[ 1.175858,0] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[ 1.176010,0] usbcore: registered new interface driver wacom
<6>[ 1.176072,0] wacom: v1.52:USB Wacom tablet driver
<6>[ 1.176285,0] atmxt_probe: Driver: atmxt-i2c, Version: YN-04-01, Date: 2012-06-28
<6>[ 1.177537,0] atmxt_probe: Probe successful.
<6>[ 1.177964,0] input: light-prox as /devices/virtual/input/input2
<6>[ 1.178238,0] ct406_probe: CT406 part detected
<6>[ 1.179185,0] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input3
<6>[ 1.179673,0] using input dev keypad_8960 for key reset
<6>[ 1.179764,0] using input dev pmic8xxx_pwrkey for key reset
<6>[ 1.180558,0] using rtc device, pm8xxx_rtc, for alarms
<6>[ 1.180680,0] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
<6>[ 1.180985,0] i2c /dev entries driver
<6>[ 1.181321,0] Linux media interface: v0.10
<6>[ 1.181474,0] lirc_dev: IR Remote Control driver registered, major 235
<6>[ 1.181565,0] IR NEC protocol handler initialized
<6>[ 1.181626,0] IR RC5(x) protocol handler initialized
<6>[ 1.181748,0] IR RC6 protocol handler initialized
<6>[ 1.181809,0] IR JVC protocol handler initialized
<6>[ 1.181870,0] IR Sony protocol handler initialized
<6>[ 1.181962,0] IR RC5 (streamzap) protocol handler initialized
<6>[ 1.182023,0] IR LIRC bridge handler initialized
<6>[ 1.182145,0] Linux video capture interface: v2.00
<6>[ 1.182267,0] usbcore: registered new interface driver uvcvideo
<6>[ 1.182359,0] USB Video Class driver (v1.1.0)
<6>[ 1.182664,0] ov8820_power_up R:97 P:95 D:0 A:54 1.8:8921_l29
<6>[ 1.182755,0] ov8820_regulator_on: 8921_l29 1800000
<6>[ 1.275202,0] ov8820 chipid: 8820
<6>[ 1.601587,0] ov8820: match_id success
<6>[ 1.601983,0] msm_sensor_register mctl_node_name[0] = video1
<6>[ 1.602044,0] ov8820_power_down
<3>[ 1.637173,0] ov8820_regulator_off: 1.8
<6>[ 1.647367,0] mt9m114_power_up R:76 D:89 A:82 CLK:24000000
<6>[ 1.706577,0] mt9m114 id: 2481
<6>[ 1.706638,0] mt9m114: match_id success
<6>[ 1.706882,0] msm_sensor_register mctl_node_name[1] = video3
<6>[ 1.706943,0] mt9m114_power_down
<6>[ 1.710819,0] Driver for 1-wire Dallas network protocol.
<6>[ 1.727880,0] lm75 10-0048: hwmon0: sensor 'tmp105'
<6>[ 1.748481,0] pm8xxx_tm_probe: OK
<6>[ 1.749061,0] device-mapper: uevent: version 1.0.3
<6>[ 1.749397,0] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 1.749732,0] cpuidle: using governor ladder
<6>[ 1.749793,0] cpuidle: using governor menu
<6>[ 1.750190,0] mmc0: mci-version: 18
<6>[ 1.751869,0] mmc0: bam physical base=0x12402000
<6>[ 1.751930,0] mmc0: bam virtual base=0xe18b4000
<6>[ 1.752052,0] mmc0: BAM device registered. bam_handle=0xe06f2600
<6>[ 1.752205,0] sps:REVISION of BAM 0xe18b4000 is 0x5.
<6>[ 1.752510,0] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
<6>[ 1.752571,0] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
<3>[ 1.752723,0] mmc0: No card detect facilities available
<6>[ 1.752937,0] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
<6>[ 1.753059,0] mmc0: 8 bit data mode enabled
<6>[ 1.753120,0] mmc0: 4 bit data mode disabled
<6>[ 1.753212,0] mmc0: polling status mode disabled
<6>[ 1.753273,0] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
<6>[ 1.753395,0] mmc0: Slot eject status = 0
<6>[ 1.753456,0] mmc0: Power save feature enable = 1
<6>[ 1.753547,0] mmc0: SPS-BAM data transfer mode available
<6>[ 1.753761,0] mmc1: mci-version: 18
<6>[ 1.756325,0] mmc1: bam physical base=0x12182000
<6>[ 1.756416,0] mmc1: bam virtual base=0xe18fc000
<6>[ 1.756477,0] mmc1: BAM device registered. bam_handle=0xe06f2c00
<6>[ 1.756661,0] sps:REVISION of BAM 0xe18fc000 is 0x5.
<6>[ 1.756966,0] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
<6>[ 1.757057,0] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
<6>[ 1.757607,0] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,651 dma -1 dmacrcri -1
<6>[ 1.757698,0] mmc1: 8 bit data mode disabled
<6>[ 1.757759,0] mmc1: 4 bit data mode enabled
<6>[ 1.757881,0] mmc1: polling status mode disabled
<6>[ 1.757942,0] mmc1: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
<6>[ 1.758034,0] mmc1: Slot eject status = 0
<6>[ 1.758095,0] mmc1: Power save feature enable = 1
<6>[ 1.758156,0] mmc1: SPS-BAM data transfer mode available
<6>[ 1.758553,0] pm8xxx_rgb_led_probe: num_leds is 3
<7>[ 1.758675,0] Registered led device: red
<6>[ 1.758797,0] create_pm8xxx_rgb_led: LED class red, gpio 175, can sleep = 1
<6>[ 1.758858,0] create_pm8xxx_rgb_led: requested pwm for red, pwm_id=0
<7>[ 1.759041,0] Registered led device: green
<6>[ 1.759102,0] create_pm8xxx_rgb_led: LED class green, gpio 176, can sleep = 1
<6>[ 1.759194,0] create_pm8xxx_rgb_led: requested pwm for green, pwm_id=1
<7>[ 1.759316,0] Registered led device: blue
<6>[ 1.759438,0] create_pm8xxx_rgb_led: LED class blue, gpio 177, can sleep = 1
<6>[ 1.759499,0] create_pm8xxx_rgb_led: requested pwm for blue, pwm_id=2
<7>[ 1.761178,0] Registered led device: torch-flash
<6>[ 1.763039,0] usbcore: registered new interface driver usbhid
<6>[ 1.763131,0] usbhid: USB HID core driver
<6>[ 1.763467,0] logger: created 1024K log 'log_main'
<6>[ 1.763619,0] logger: created 512K log 'log_events'
<6>[ 1.763741,0] logger: created 64K log 'log_radio'
<6>[ 1.763863,0] logger: created 64K log 'log_system'
<6>[ 1.764352,0] usbcore: registered new interface driver snd-usb-audio
<3>[ 1.765267,0] tabla_probe
<6>[ 1.766183,0] msm_pcm_probe: dev name msm-voip-dsp
<6>[ 1.766885,0] msm_pcm_probe: dev name msm-pcm-dsp
<6>[ 1.767160,0] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
<6>[ 1.767373,0] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
<6>[ 1.768106,0] msm_compr_probe: dev name msm-compr-dsp
<6>[ 1.768502,0] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
<3>[ 1.769327,0] msm8960_configure_headset_mic_gpios: US_EURO_, AV_SWITCH gpios not configured!!!
<3>[ 1.769388,0] msm8960_audio_init Fail to configure headset mic gpios
<6>[ 1.975278,0] MMI Battery EEPROM Read 192 Bytes
<6>[ 1.975339,0] MMI Battery EEPROM Page 2 Checksum = 0
<6>[ 1.975431,0] MMI Battery EEPROM Page 3 Checksum = 0
<6>[ 1.975492,0] MMI Battery EEPROM Copyright Valid = 1
<6>[ 1.975644,0] MMI Battery Full Capacity 0xAE
<6>[ 1.975705,0] MMI Battery Peak Voltage 0xB9
<6>[ 1.975766,0] MMI Battery DC Impedance 0x5E
<6>[ 1.975888,0] MMI Battery Cell ID 0x4157
<6>[ 1.981229,0] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
<6>[ 1.981565,0] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
<6>[ 1.981870,0] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
<6>[ 1.982206,0] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
<6>[ 1.982481,0] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
<6>[ 1.982847,0] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
<6>[ 1.983122,0] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
<6>[ 1.983427,0] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
<6>[ 1.983671,0] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
<6>[ 1.984007,0] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
<6>[ 1.984312,0] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
<6>[ 1.984648,0] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
<6>[ 1.984953,0] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
<6>[ 1.985289,0] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
<6>[ 1.985594,0] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
<6>[ 1.985899,0] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
<6>[ 1.986143,0] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
<6>[ 1.986418,0] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
<6>[ 1.986662,0] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
<6>[ 1.986937,0] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
<6>[ 1.987242,0] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
<6>[ 1.987456,0] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
<6>[ 1.987761,0] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
<6>[ 1.988005,0] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
<6>[ 1.988341,0] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
<6>[ 1.989592,0] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
<6>[ 1.991088,0] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
<6>[ 1.992369,0] mmc0: new high speed DDR MMC card at address 0001
<6>[ 1.992766,0] mmcblk0: mmc0:0001 SEM08G 7.28 GiB
<6>[ 1.993010,0] mmcblk0boot0: mmc0:0001 SEM08G partition 1 2.00 MiB
<6>[ 1.993285,0] mmcblk0boot1: mmc0:0001 SEM08G partition 2 2.00 MiB
<6>[ 1.993804,0] msm8960_audrx_init : Tabla version 2
<3>[ 1.994231,0] tabla_codec tabla_codec: Failed to add route ANCRight Headset Mic->MIC BIAS3 Internal1
<6>[ 1.996276,0] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39
<3>[ 1.999786,0] apanic: Bound to mmc block device 'mmcblk0p33(259:1)'
<6>[ 1.999847,0] apanic: c(1024, 131072) t(740352, 88593) a(132096, 608153)
<6>[ 2.001770,0] mmcblk0boot1: unknown partition table
<6>[ 2.003540,0] mmcblk0boot0: unknown partition table
<6>[ 2.067694,0] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
<6>[ 2.069220,0] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
<6>[ 2.069647,0] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
<6>[ 2.070135,0] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
<6>[ 2.071997,0] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input4
<6>[ 2.072272,0] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input5
<6>[ 2.075293,0] oprofile: using arm/armv7-krait
<6>[ 2.075507,0] GACT probability NOT on
<6>[ 2.075568,0] Mirror/redirect action on
<6>[ 2.075629,0] u32 classifier
<6>[ 2.075751,0] Actions configured
<6>[ 2.075812,0] Netfilter messages via NETLINK v0.30.
<6>[ 2.075904,0] nf_conntrack version 0.5.0 (12672 buckets, 50688 max)
<6>[ 2.076453,0] ctnetlink v0.93: registering with nfnetlink.
<6>[ 2.076545,0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 2.076575,0] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 2.077033,0] xt_time: kernel timezone is -0000
<6>[ 2.077216,0] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.077430,0] arp_tables: (C) 2002 David S. Miller
<6>[ 2.077521,0] TCP bic registered
<6>[ 2.077582,0] TCP cubic registered
<6>[ 2.077674,0] TCP htcp registered
<6>[ 2.077735,0] Initializing XFRM netlink socket
<6>[ 2.078345,0] NET: Registered protocol family 10
<6>[ 2.079536,0] Mobile IPv6
<6>[ 2.079627,0] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 2.079780,0] IPv6 over IPv4 tunneling driver
<6>[ 2.080482,0] NET: Registered protocol family 17
<6>[ 2.080543,0] NET: Registered protocol family 15
<5>[ 2.080726,0] Bridge firewalling registered
<6>[ 2.080909,0] Bluetooth: RFCOMM TTY layer initialized
<6>[ 2.081001,0] Bluetooth: RFCOMM socket layer initialized
<6>[ 2.081092,0] Bluetooth: RFCOMM ver 1.11
<6>[ 2.081153,0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 2.081275,0] Bluetooth: BNEP filters: protocol multicast
<6>[ 2.081336,0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 2.081550,0] L2TP core driver, V2.0
<5>[ 2.081611,0] Registering the dns_resolver key type
<6>[ 2.081672,0] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
<5>[ 2.081886,0] Registering SWP/SWPB emulation handler
<6>[ 2.090828,0] clock_late_init() disabled 197 unused clocks
<6>[ 2.098763,0] MSM Watchdog Initialized
<6>[ 2.103403,1] registered taskstats version 1
<6>[ 2.104806,0] EMU-det(request_gpios): requesting gpio[2] EMU_SCI_OUT_GPIO-205
<6>[ 2.104898,0] EMU-det(request_gpios): gpio 205 is IN
<6>[ 2.105081,0] EMU-det(request_gpios): exporting gpio EMU_SCI_OUT_GPIO-205
<6>[ 2.105142,0] EMU-det(request_gpios): couldn't find OPTIONAL EMU_ID_EN_GPIO
<6>[ 2.105264,0] EMU-det(request_gpios): requesting gpio[0] EMU_MUX_CTRL0_GPIO-107
<6>[ 2.105386,0] EMU-det(request_gpios): gpio 107 is OUT
<6>[ 2.105447,0] EMU-det(request_gpios): requesting gpio[1] EMU_MUX_CTRL1_GPIO-96
<6>[ 2.105539,0] EMU-det(request_gpios): gpio 96 is OUT
<6>[ 2.105600,0] EMU-det(request_gpios): requesting gpio[4] SEMU_PPD_DET_GPIO-174
<6>[ 2.105722,0] EMU-det(request_gpios): gpio 174 is IN
<6>[ 2.105844,0] EMU-det(request_gpios): exporting gpio SEMU_PPD_DET_GPIO-174
<6>[ 2.105966,0] EMU-det(request_gpios): requesting gpio[5] SEMU_ALT_MODE_EN_GPIO-186
<6>[ 2.106119,0] EMU-det(request_gpios): exporting gpio SEMU_ALT_MODE_EN_GPIO-186
<6>[ 2.106180,0] EMU-det(request_gpios): couldn't find OPTIONAL EMU_ID_GPIO
<6>[ 2.106302,0] EMU-det(request_gpios): requesting gpio[7] DMB_PPD_DET_GPIO-204
<6>[ 2.106363,0] EMU-det(request_gpios): gpio 204 is IN
<6>[ 2.106607,0] EMU-det(request_gpios): exporting gpio DMB_PPD_DET_GPIO-204
<6>[ 2.106668,0] EMU-det(request_gpios): requesting gpio[8] DPLUS_GPIO-192
<6>[ 2.106790,0] EMU-det(request_gpios): requesting gpio[9] DMINUS_GPIO-172
<6>[ 2.106882,0] EMU-det(request_gpios): requesting gpio[10] WHISPER_UART_TX_GPIO-18
<6>[ 2.106973,0] EMU-det(request_gpios): gpio 18 is OUT
<6>[ 2.107126,0] EMU-det(request_gpios): exporting gpio WHISPER_UART_TX_GPIO-18
<6>[ 2.107187,0] EMU-det(request_gpios): requesting gpio[11] WHISPER_UART_RX_GPIO-19
<6>[ 2.107309,0] EMU-det(request_gpios): gpio 19 is IN
<6>[ 2.107431,0] EMU-det(request_gpios): exporting gpio WHISPER_UART_RX_GPIO-19
<6>[ 2.107523,0] EMU-det(request_gpios): requesting gpio[12] TX_PAIR_GPIO-173
<6>[ 2.107645,0] EMU-det(request_gpios): requesting gpio[13] RX_PAIR_GPIO-193
<6>[ 2.107706,0] EMU-det(emu_id_protection_setup): No neccessary action
<6>[ 2.107828,0] EMU-det(emu_det_probe): done with gpios
<6>[ 2.132183,1] msm_otg msm_otg: phy_reset: success
<4>[ 2.154433,0] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 2.156722,0] mmc1: new ultra high speed DDR50 SDHC card at address 1234
<6>[ 2.157057,1] mmcblk1: mmc1:1234 SA32G 28.8 GiB
<6>[ 2.157973,1] mmcblk1: p1
<6>[ 2.236563,1] EMU-det(request_irqs): requesting irq[1] EMU_SCI_OUT_GPIO-577
<6>[ 2.236990,1] EMU-det(request_irqs): requesting irq[0] SEMU_PPD_DET_GPIO-654
<6>[ 2.237540,1] EMU-det(emu_det_probe): done with irqs
<6>[ 2.237753,1] EMU-det(emu_det_probe): registered callback with PM8921
<6>[ 2.239218,1] EMU-det(emu_det_probe): EMU detection driver started
<6>[ 2.239798,1] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2024-10-05 08:44:52 UTC (1728117892)
<6>[ 2.241507,0] Battery Cell ID Found: 3
<6>[ 2.243155,0] read_shutdown_soc: shutdown_soc = 56
<3>[ 2.244071,0] read_ocv_trim: program rev reg is 0x37
<3>[ 2.244254,0] read_ocv_trim: trim reg is 0x46
<3>[ 2.244590,0] read_ocv_trim: trim delta is 3
<6>[ 2.249870,0] adjust_remaining_charge_for_shutdown_soc: shutdown_soc = 56 forcing it now
<6>[ 2.250206,0] adjust_remaining_charge_for_shutdown_soc: To force shutdown_soc = 56, rc = 987485, pc = 56, ocv mv = 3891
<6>[ 2.250541,0] adjust_remaining_charge_for_shutdown_soc: test revlookup pc = 58 for ocv = 3891
<6>[ 2.250877,0] adjust_remaining_charge_for_shutdown_soc: test revlookup pc = 58 for ocv = 3890
<6>[ 2.251060,0] adjust_remaining_charge_for_shutdown_soc: test revlookup pc = 58 for ocv = 3889
<6>[ 2.251396,0] adjust_remaining_charge_for_shutdown_soc: test revlookup pc = 57 for ocv = 3888
<6>[ 2.251732,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 2.251915,0] pm8921_bms_probe: OK battery_capacity_at_boot=56 volt = 3641073 ocv = 3888000
<3>[ 2.254753,0] get_prop_batt_status: alarm_state=0,batt_valid=0
<3>[ 2.257622,0] pm8921_is_battery_charging: called before init
<6>[ 2.257805,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<3>[ 2.267053,0] get_prop_batt_status: alarm_state=0,batt_valid=0
<3>[ 2.267327,0] get_prop_batt_status: alarm_state=0,batt_valid=0
<6>[ 2.270196,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 2.281336,0] EMU-det(emu_det_vbus_state): PM8921 USBIN callback: in
<6>[ 2.283290,0] Battery Cell ID Found: 3
<6>[ 2.289394,0] ALSA device list:
<6>[ 2.289729,0] #0: msm8960-snd-card
<4>[ 2.290126,0] Warning: unable to open an initial console.
<6>[ 2.290981,0] Freeing init memory: 300K
<5>[ 2.295650,1] init: init started!
<7>[ 2.310148,1] SELinux: 2048 avtab hash slots, 11147 rules.
<7>[ 2.321928,1] SELinux: 2048 avtab hash slots, 11147 rules.
<7>[ 2.322050,1] SELinux: 1 users, 2 roles, 980 types, 0 bools, 1 sens, 1024 cats
<7>[ 2.322264,1] SELinux: 87 classes, 11147 rules
<7>[ 2.324034,1] SELinux: Completing initialization.
<7>[ 2.324095,1] SELinux: Setting up existing superblocks.
<7>[ 2.324187,1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 2.324309,1] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 2.325072,1] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 2.325194,1] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 2.325286,1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.325347,1] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 2.332794,1] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 2.332885,1] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 2.332977,1] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[ 2.333099,1] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 2.333221,1] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 2.333374,1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.333496,1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[ 2.509018,1] type=1403 audit(1728117892.760:2): policy loaded auid=4294967295 ses=4294967295
<5>[ 2.509629,1] type=1404 audit(1728117892.760:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<5>[ 2.697237,1] init: (Initializing SELinux enforcing took 0.40s.)
<5>[ 2.743018,0] init: init second stage started!
<6>[ 2.776712,1] EMU-det(detection_work): state CONFIG, time since last run -297220 ms
<6>[ 2.777018,1] EMU-det(alt_mode_setup): SEMU_ALT_MODE_EN is standard
<6>[ 2.786723,1] EMU-det(detection_work): state SAMPLE, time since last run 10 ms
<6>[ 2.787913,1] EMU-det(adc_vbus_get): vbus=5082 mV
<6>[ 2.846940,1] EMU-det(get_sense): SEMU_PPD_DET: ID floating
<3>[ 2.880451,0] init: waitpid failed: No child processes
<5>[ 2.882832,0] init: (Loading properties from /default.prop took 0.00s.)
<3>[ 2.883595,0] init: /init.rc: 11: invalid command 'setcon'
<3>[ 2.883717,0] init: /init.rc: 57: invalid command 'load_all_props'
<3>[ 2.883931,0] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
<5>[ 2.884144,0] init: (Parsing /init.recovery.usb.rc took 0.00s.)
<3>[ 2.884236,0] init: could not import file '/init.recovery.qcom.rc' from '/init.rc'
<5>[ 2.884358,0] init: (Parsing /init.rc took 0.00s.)
<5>[ 2.884541,0] type=1400 audit(1728117893.130:4): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=0
<5>[ 2.884724,0] init: write_file: Unable to write to '/sys/fs/selinux/checkreqprot': Permission denied
<5>[ 2.884907,0] init: Starting service 'ueventd'...
<5>[ 2.885273,0] init: Starting service 'healthd'...
<5>[ 2.885640,0] init: Waiting for /dev/.coldboot_done...
<5>[ 2.887166,0] type=1400 audit(1728117893.140:5): avc: denied { write } for pid=136 comm="healthd" name="/" dev=tmpfs ino=4136 scontext=u:r:healthd:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0
<5>[ 2.888264,1] ueventd: ueventd started!
<6>[ 2.889699,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<3>[ 2.890676,1] ueventd: invalid uid 'fm_radio'
<6>[ 2.906882,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
<6>[ 2.906973,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
<6>[ 2.907065,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
<6>[ 2.907157,0] EMU-det(detection_work): SAMPLE keep waiting ...
<6>[ 2.916862,0] EMU-det(detection_work): state SAMPLE, time since last run 130 ms
<6>[ 2.918113,0] EMU-det(adc_vbus_get): vbus=5081 mV
<6>[ 2.977231,0] EMU-det(get_sense): SEMU_PPD_DET: ID floating
<6>[ 2.989623,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 2.991820,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.011658,1] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.024080,1] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.036990,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
<6>[ 3.037112,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
<6>[ 3.037234,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
<6>[ 3.037417,0] EMU-det(detection_work): state IDENTIFY, time since last run 120 ms
<6>[ 3.038699,0] EMU-det(adc_vbus_get): vbus=5081 mV
<6>[ 3.096871,0] EMU-det(get_sense): SEMU_PPD_DET: ID floating
<6>[ 3.157027,0] EMU-det(get_sense): No need to check DMB_PPD_DET_N
<6>[ 3.157118,0] EMU-det(sense_dp_dm): D+/D- mask: 0x0
<6>[ 3.157240,0] EMU-det(get_sense): irq=0, SESS_VLD, FLOAT, USB_DEV,
<6>[ 3.157301,0] EMU-det(notify_accy): EMU detection Notify: USB
<6>[ 3.157607,0] EMU-det(alt_mode_setup): SEMU_ALT_MODE_EN is standard
<6>[ 3.157668,0] msm_otg msm_otg: received VBUS event
<6>[ 3.157759,0] msm_otg msm_otg: UNDEFINED --> PERIPHERAL
<6>[ 3.157912,0] pm8921_chg_accy_notify: pm8921_chg_accy_notify: accy_state: 7
<6>[ 3.158919,0] pm8921_chg_accy_notify: pm8921_chg_accy_notify: accy_state: 0
<6>[ 3.160994,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.184343,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.187944,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.198718,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.201129,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.209888,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.218800,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.230337,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.241049,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.251854,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.385899,1] atmxt_tdat_callback: Processing atmxt-r2.tdat...
<6>[ 3.386143,1] input: atmxt-i2c as /devices/virtual/input/input6
<5>[ 3.399023,1] ueventd: Coldboot took 0.47s.
<5>[ 3.407050,0] init: Waiting for /dev/.coldboot_done took 0.52s.
<6>[ 3.427651,1] atmxt_set_ic_state: IC state UNKNOWN -> PRESENT
<6>[ 3.427865,1] atmxt_restart_ic: Family ID: 0x82, Variant ID: 0x1A, Version: 0x10, Build: 0xAA, Matrix: 24x14, Objects: 22
<6>[ 3.434243,1] atmxt_message_handler6: Touch IC reset complete.
<6>[ 3.434610,1] atmxt_message_handler6: Touch IC is calibrating.
<6>[ 3.434793,1] atmxt_set_ic_state: IC state PRESENT -> ACTIVE
<6>[ 3.435556,1] atmxt_set_drv_state: Driver state INIT -> ACTIVE
<6>[ 3.435861,1] atmxt_tdat_callback: Touch initialization successful.
<6>[ 3.437326,1] atmxt_message_handler6: Touch IC calibration complete.
<7>[ 3.509232,0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<3>[ 3.510941,0] android_usb: already disabled
<5>[ 3.511216,0] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
<6>[ 3.511368,0] android_usb: set functions= mtp,adb
<3>[ 3.511582,0] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
<3>[ 3.511704,0] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
<5>[ 3.511918,0] init: (Loading properties from /system/build.prop took 0.00s.)
<5>[ 3.512040,0] init: (Loading properties from /vendor/build.prop took 0.00s.)
<5>[ 3.512162,0] init: (Loading properties from /factory/factory.prop took 0.00s.)
<5>[ 3.514726,0] init: (Loading properties from /data/local.prop took 0.00s.)
<3>[ 3.514878,0] init: Unable to open persistent property directory "/data/property": No such file or directory
<3>[ 3.515031,0] init: failed to open '/sys/devices/soc0/soc_id'
<3>[ 3.515153,0] init: failed to open '/sys/devices/soc0/platform_version'
<3>[ 3.515336,0] init: failed to open '/sys/devices/soc0/hw_platform'
<3>[ 3.515519,0] init: Detected MSM SOC ID=87 SOC VER=65536 BOARD TYPE=Unknown
<5>[ 3.515977,0] type=1400 audit(1728117893.760:6): avc: denied { execute_no_trans } for pid=140 comm="init" path="/sbin/busybox" dev=rootfs ino=2560 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=0
<3>[ 3.516587,0] init: Found carrier id: sprint hardware:it:w� model no: Setting build properties for asanti_c device
<5>[ 3.519609,0] init: Starting service 'set_permissive'...
<3>[ 3.521440,0] init: Warning! Service recovery needs a SELinux domain defined; please fix!
<5>[ 3.521593,0] init: Starting service 'recovery'...
<3>[ 3.522081,0] android_usb: already disabled
<5>[ 3.522203,0] init: Starting service 'adbd'...
<5>[ 3.522875,0] type=1400 audit(1728117893.770:7): avc: denied { execute_no_trans } for pid=142 comm="init" path="/sbin/recovery" dev=rootfs ino=2765 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=0
<3>[ 3.523088,0] init: cannot execve('/sbin/recovery'): Permission denied
<5>[ 3.523454,0] init: Service 'recovery' (pid 142) exited with status 127
<5>[ 3.523515,0] init: Service 'recovery' (pid 142) killing any children in process group
<6>[ 3.526690,0] adb_open
<6>[ 3.526751,0] mtp_bind_config
<6>[ 3.526873,0] adb_bind_config
<5>[ 3.567373,1] type=1400 audit(1728117893.820:8): avc: denied { write } for pid=149 comm="setenforce" name="enforce" dev=selinuxfs ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
<5>[ 3.567556,1] type=1400 audit(1728117893.820:9): avc: denied { setenforce } for pid=149 comm="setenforce" scontext=u:r:recovery:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
<5>[ 3.567709,1] type=1404 audit(1728117893.820:10): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
<5>[ 3.568808,0] init: Service 'set_permissive' (pid 141) exited with status 0
<6>[ 3.576346,0] atmxt_message_handler6: Touch IC is calibrating.
<6>[ 3.628017,0] atmxt_message_handler6: Touch IC calibration complete.
<6>[ 3.640103,0] android_usb: did not send uevent (0 0 (null))
<6>[ 3.752235,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 3.756111,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 3.878101,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 3.882313,0] android_usb gadget: high speed config #1: android
<6>[ 3.882710,0] msm_otg msm_otg: Avail curr from USB = 500
<6>[ 3.883839,0] android_usb: sent uevent USB_STATE=CONFIGURED
<6>[ 3.887013,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.888814,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 3.900381,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 5.577262,0] lm3532_bl_work: enabling PWM
<6>[ 6.586357,0] Report pwrkey press event
<4>[ 6.693392,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
<3>[ 8.574912,0] init: Warning! Service recovery needs a SELinux domain defined; please fix!
<5>[ 8.575278,0] init: Starting service 'recovery'...
<5>[ 8.576926,0] type=1400 audit(1728117898.826:11): avc: denied { execute_no_trans } for pid=152 comm="init" path="/sbin/recovery" dev=rootfs ino=2765 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<5>[ 8.651945,0] type=1400 audit(1728117898.906:12): avc: denied { append } for pid=152 comm="recovery" name="recovery.log" dev=tmpfs ino=6367 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1
<5>[ 8.652281,0] type=1400 audit(1728117898.906:13): avc: denied { write } for pid=152 comm="recovery" name="property_service" dev=tmpfs ino=6150 scontext=u:r:init:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
<5>[ 8.655547,0] type=1400 audit(1728117898.906:14): avc: denied { write } for pid=152 comm="recovery" name="fb0" dev=tmpfs ino=4292 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
<5>[ 8.655760,0] type=1400 audit(1728117898.906:15): avc: denied { ioctl } for pid=152 comm="recovery" path="/dev/graphics/fb0" dev="tmpfs" ino=4292 ioctlcmd=4602 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
<6>[ 8.728155,0] panel_enable is called
<6>[ 8.853776,0] MIPI panel Manufacture_id = 0x83
<6>[ 8.853776,0] MIPI panel Controller_ver = 0x3
<6>[ 8.853837,0] MIPI panel Controller_drv_ver = 0x83
<6>[ 8.853898,0] panel_enable completed. Power_mode =0x98
<4>[ 8.855272,0] mdp4_csc_config: Block type 10 isn't supported by CSC.
<3>[ 8.856004,0] mdp4_calc_req_mdp_clk: src_h is zero!
<6>[ 8.906210,0] msm_otg msm_otg: Avail curr from USB = 0
<6>[ 8.906760,0] adb_release
<6>[ 8.907034,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 8.907370,0] adb_open
<6>[ 8.907401,0] mtp_bind_config
<6>[ 8.907431,0] adb_bind_config
<6>[ 8.909568,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 8.917930,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 8.925408,0] panel_disable is called
<6>[ 8.928063,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 9.016877,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 9.020662,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 9.062902,0] panel_disable completed
<6>[ 9.134167,0] panel_enable is called
<6>[ 9.142804,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 9.147169,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 9.258843,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 9.259667,0] panel_enable completed. Power_mode =0x98
<6>[ 9.262536,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<4>[ 9.264245,0] mdp4_csc_config: Block type 10 isn't supported by CSC.
<5>[ 9.319884,0] type=1400 audit(1728117899.566:16): avc: denied { execmem } for pid=152 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
<5>[ 9.320036,0] type=1400 audit(1728117899.566:17): avc: denied { execute } for pid=152 comm="recovery" path="/dev/ashmem" dev=tmpfs ino=4222 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file permissive=1
<5>[ 9.370425,0] type=1400 audit(1728117899.616:18): avc: denied { ioctl } for pid=152 comm="recovery" path="/dev/input/event6" dev="tmpfs" ino=4349 ioctlcmd=4506 scontext=u:r:init:s0 tcontext=u:object_r:input_device:s0 tclass=chr_file permissive=1
<5>[ 9.371097,0] type=1400 audit(1728117899.616:19): avc: denied { rename } for pid=152 comm="recovery" name="recovery.fstab" dev=rootfs ino=2525 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<6>[ 9.384617,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 9.388676,0] android_usb gadget: high speed config #1: android
<6>[ 9.388799,0] msm_otg msm_otg: Avail curr from USB = 500
<6>[ 9.389104,0] android_usb: sent uevent USB_STATE=CONFIGURED
<6>[ 9.391820,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 9.398321,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 9.403143,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<7>[ 9.405737,1] EXT4-fs (mmcblk0p39): ext4_orphan_cleanup: deleting unreferenced inode 66167
<7>[ 9.411597,1] EXT4-fs (mmcblk0p39): ext4_orphan_cleanup: deleting unreferenced inode 32746
<6>[ 9.412818,1] EXT4-fs (mmcblk0p39): 2 orphan inodes deleted
<6>[ 9.413001,1] EXT4-fs (mmcblk0p39): recovery complete
<6>[ 9.437631,1] EXT4-fs (mmcblk0p39): mounted filesystem with ordered data mode. Opts:
<7>[ 9.437875,1] SELinux: initialized (dev mmcblk0p39, type ext4), uses xattr
<6>[ 9.561574,1] EXT4-fs (mmcblk0p39): mounted filesystem with ordered data mode. Opts:
<7>[ 9.561727,1] SELinux: initialized (dev mmcblk0p39, type ext4), uses xattr
<6>[ 9.620051,1] EXT4-fs (mmcblk0p36): mounted filesystem with ordered data mode. Opts:
<7>[ 9.620173,1] SELinux: initialized (dev mmcblk0p36, type ext4), uses xattr
<6>[ 9.621364,1] SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
<5>[ 9.622127,1] type=1400 audit(1728117899.867:20): avc: denied { create } for pid=152 comm="recovery" name="fstab" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
<6>[ 9.631588,1] SELinux: Context u:object_r:bluetooth_logs_data_file:s0 is not valid (left unmapped).
<6>[ 9.645200,1] SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
<6>[ 9.645566,1] SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
<6>[ 9.645780,1] SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
<6>[ 9.645994,1] SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
<6>[ 9.646299,1] SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
<6>[ 9.646665,1] SELinux: Context u:object_r:user_profile_foreign_dex_data_file:s0 is not valid (left unmapped).
<6>[ 9.646909,1] SELinux: Context u:object_r:user_profile_foreign_dex_data_file:s0:c512,c768 is not valid (left unmapped).
<6>[ 9.704074,1] SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
<6>[ 9.705814,1] SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
<6>[ 10.794964,0] Report pwrkey release event
<4>[ 10.921776,0] pm8xxx_irq_mask_ack: mask acking rouge irq=664 pmirq=224
<6>[ 13.902212,0] Report pwrkey press event
<6>[ 14.033602,0] Report pwrkey release event
<6>[ 14.411139,0] msm_otg msm_otg: Avail curr from USB = 0
<6>[ 14.412238,0] adb_release
<6>[ 14.413123,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 14.413825,0] adb_open
<6>[ 14.414008,0] mtp_bind_config
<6>[ 14.414314,0] adb_bind_config
<6>[ 14.417305,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 14.423714,0] android_usb: did not send uevent (0 0 (null))
<6>[ 14.426125,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 14.430306,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 14.522508,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 14.526598,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 14.649107,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 14.654173,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 14.764901,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 14.768838,0] android_usb: sent uevent USB_STATE=DISCONNECTED
<6>[ 14.891713,0] android_usb: sent uevent USB_STATE=CONNECTED
<6>[ 14.895528,0] android_usb gadget: high speed config #1: android
<6>[ 14.895895,0] msm_otg msm_otg: Avail curr from USB = 500
<6>[ 14.896627,0] android_usb: sent uevent USB_STATE=CONFIGURED
<6>[ 14.899923,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 14.908774,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 14.912437,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<4>[ 15.404120,1] audit_printk_skb: 15 callbacks suppressed
<5>[ 15.404211,1] type=1400 audit(1728117905.653:26): avc: denied { getattr } for pid=152 comm="recovery" path="/data/data/com.termux/files/usr/var/run/mpd.fifo" dev=mmcblk0p39 ino=66986 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=fifo_file permissive=1
<5>[ 15.404486,1] type=1400 audit(1728117905.653:27): avc: denied { read } for pid=152 comm="recovery" name="dbus" dev=mmcblk0p39 ino=74499 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1
<5>[ 15.404669,1] type=1400 audit(1728117905.653:28): avc: denied { open } for pid=152 comm="recovery" name="dbus" dev=mmcblk0p39 ino=74499 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1
<5>[ 15.405035,1] type=1400 audit(1728117905.653:29): avc: denied { getattr } for pid=152 comm="recovery" path="/data/data/com.termux/files/usr/var/run/dbus/system_bus_socket" dev=mmcblk0p39 ino=74504 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=sock_file permissive=1
<5>[ 15.405280,1] type=1400 audit(1728117905.653:30): avc: denied { getattr } for pid=152 comm="recovery" path="/data/data/com.termux/files/usr/var/run/dbus/pid" dev=mmcblk0p39 ino=74505 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=file permissive=1
<6>[ 15.657042,1] SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
<6>[ 15.658812,1] SELinux: Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
<6>[ 15.698031,1] SELinux: Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
<6>[ 15.704043,1] SELinux: Context u:object_r:shortcut_manager_icons:s0 is not valid (left unmapped).
<6>[ 15.777445,1] SELinux: Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
<6>[ 15.779612,1] SELinux: Context u:object_r:magisk_file:s0 is not valid (left unmapped).
<6>[ 15.799023,1] SELinux: Context u:object_r:charge_only_mode_data_file:s0 is not valid (left unmapped).
<6>[ 15.820357,1] EXT4-fs (mmcblk0p37): mounted filesystem with ordered data mode. Opts:
<7>[ 15.820479,1] SELinux: initialized (dev mmcblk0p37, type ext4), uses xattr
<6>[ 15.900076,1] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts:
<7>[ 15.900137,1] SELinux: initialized (dev mmcblk1p1, type ext4), uses xattr
<6>[ 16.378177,0] calculate_state_of_charge: Forcing SHUTDOWN_SOC = 56
<6>[ 17.000885,1] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts:
<7>[ 17.001220,1] SELinux: initialized (dev mmcblk1p1, type ext4), uses xattr
<6>[ 17.029848,1] EXT4-fs (mmcblk0p37): mounted filesystem with ordered data mode. Opts:
<7>[ 17.030062,1] SELinux: initialized (dev mmcblk0p37, type ext4), uses xattr
<5>[ 17.068518,0] type=1400 audit(1728117907.060:31): avc: denied { create } for pid=152 comm="recovery" name="orsin" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
<5>[ 17.068945,0] type=1400 audit(1728117907.060:32): avc: denied { read } for pid=152 comm="recovery" name="orsin" dev=rootfs ino=6394 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
<5>[ 17.069189,0] type=1400 audit(1728117907.060:33): avc: denied { open } for pid=152 comm="recovery" name="orsin" dev=rootfs ino=6394 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
<5>[ 17.810102,1] type=1400 audit(1728117907.800:34): avc: denied { write } for pid=185 comm="recovery" name="mtp_usb" dev=tmpfs ino=4236 scontext=u:r:init:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
<6>[ 17.810590,1] mtp_open
<5>[ 17.841660,0] type=1400 audit(1728117907.820:35): avc: denied { ioctl } for pid=192 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=4236 ioctlcmd=4d03 scontext=u:r:init:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
Partition map
motorola-asanti:~$ ls -lah /dev/block/platform/msm_sdcc.1/by-name/
lrwxrwxrwx 1 root root 20 Jan 1 00:59 aboot -> /dev/block/mmcblk0p5 lrwxrwxrwx 1 root root 21 Jan 1 00:59 abootBackup -> /dev/block/mmcblk0p12 lrwxrwxrwx 1 root root 21 Jan 1 00:59 boot -> /dev/block/mmcblk0p31 lrwxrwxrwx 1 root root 21 Jan 1 00:59 cache -> /dev/block/mmcblk0p36 lrwxrwxrwx 1 root root 21 Jan 1 00:59 carriercust -> /dev/block/mmcblk0p35 lrwxrwxrwx 1 root root 21 Jan 1 00:59 cdrom -> /dev/block/mmcblk0p38 lrwxrwxrwx 1 root root 21 Jan 1 00:59 cid -> /dev/block/mmcblk0p28 lrwxrwxrwx 1 root root 21 Jan 1 00:59 devtree -> /dev/block/mmcblk0p30 lrwxrwxrwx 1 root root 21 Jan 1 00:59 dhob -> /dev/block/mmcblk0p21 lrwxrwxrwx 1 root root 21 Jan 1 00:59 fsg -> /dev/block/mmcblk0p24 lrwxrwxrwx 1 root root 21 Jan 1 00:59 hob -> /dev/block/mmcblk0p20 lrwxrwxrwx 1 root root 21 Jan 1 00:59 kpan -> /dev/block/mmcblk0p33 lrwxrwxrwx 1 root root 21 Jan 1 00:59 logo -> /dev/block/mmcblk0p29 lrwxrwxrwx 1 root root 21 Jan 1 00:59 mbl -> /dev/block/mmcblk0p19 lrwxrwxrwx 1 root root 21 Jan 1 00:59 misc -> /dev/block/mmcblk0p26 lrwxrwxrwx 1 root root 20 Jan 1 00:59 modem -> /dev/block/mmcblk0p1 lrwxrwxrwx 1 root root 21 Jan 1 00:59 modemst1 -> /dev/block/mmcblk0p17 lrwxrwxrwx 1 root root 21 Jan 1 00:59 modemst2 -> /dev/block/mmcblk0p18 lrwxrwxrwx 1 root root 20 Jan 1 00:59 padA -> /dev/block/mmcblk0p9 lrwxrwxrwx 1 root root 21 Jan 1 00:59 padB -> /dev/block/mmcblk0p16 lrwxrwxrwx 1 root root 21 Jan 1 00:59 pds -> /dev/block/mmcblk0p27 lrwxrwxrwx 1 root root 21 Jan 1 00:59 persist -> /dev/block/mmcblk0p22 lrwxrwxrwx 1 root root 21 Jan 1 00:59 recovery -> /dev/block/mmcblk0p32 lrwxrwxrwx 1 root root 20 Jan 1 00:59 rpm -> /dev/block/mmcblk0p6 lrwxrwxrwx 1 root root 21 Jan 1 00:59 rpmBackup -> /dev/block/mmcblk0p13 lrwxrwxrwx 1 root root 20 Jan 1 00:59 sbl1 -> /dev/block/mmcblk0p2 lrwxrwxrwx 1 root root 20 Jan 1 00:59 sbl2 -> /dev/block/mmcblk0p3 lrwxrwxrwx 1 root root 21 Jan 1 00:59 sbl2Backup -> /dev/block/mmcblk0p10 lrwxrwxrwx 1 root root 20 Jan 1 00:59 sbl3 -> /dev/block/mmcblk0p4 lrwxrwxrwx 1 root root 21 Jan 1 00:59 sbl3Backup -> /dev/block/mmcblk0p11 lrwxrwxrwx 1 root root 21 Jan 1 00:59 sp -> /dev/block/mmcblk0p25 lrwxrwxrwx 1 root root 21 Jan 1 00:59 ssd -> /dev/block/mmcblk0p23 lrwxrwxrwx 1 root root 21 Jan 1 00:59 system -> /dev/block/mmcblk0p37 lrwxrwxrwx 1 root root 21 Jan 1 00:59 tombstones -> /dev/block/mmcblk0p34 lrwxrwxrwx 1 root root 20 Jan 1 00:59 tz -> /dev/block/mmcblk0p7 lrwxrwxrwx 1 root root 21 Jan 1 00:59 tzBackup -> /dev/block/mmcblk0p14 lrwxrwxrwx 1 root root 21 Jan 1 00:59 userdata -> /dev/block/mmcblk0p39 lrwxrwxrwx 1 root root 20 Jan 1 00:59 utags -> /dev/block/mmcblk0p8 lrwxrwxrwx 1 root root 21 Jan 1 00:59 utagsBackup -> /dev/block/mmcblk0p15
GPIO info
130|xt897:/ # cat /d/gpio GPIOs 0-151, msmgpio: gpio-1 (USB_HOST_EN ) out lo gpio-2 (camflash_en ) out hi gpio-6 (spi_mosi ) in lo gpio-7 (spi_miso ) in lo gpio-9 (spi_clk ) in lo gpio-11 (SLIDE ) in lo gpio-12 (lm3532_reset ) in lo gpio-13 (disp_5v_en ) out lo gpio-18 (WHISPER_UART_TX_GPIO) out hi gpio-19 (WHISPER_UART_RX_GPIO) in hi gpio-20 (i2c_sda ) in hi gpio-21 (i2c_clk ) in hi gpio-24 (RF_CONN_DET_2G3G ) in lo gpio-25 (RF_CONN_DET_LTE_1 ) in lo gpio-46 (touch_irq ) in hi gpio-47 (vib_en ) out lo gpio-49 (ct406 proximity int ) in hi gpio-50 (touch_reset ) out hi gpio-51 (nfc_firm ) out lo gpio-67 (tmp105_intr ) in hi gpio-68 (nfc_ven ) out hi gpio-73 (i2c_sda ) in hi gpio-74 (i2c_clk ) in hi gpio-75 (Factory Kill Disable) out hi gpio-79 (vib_dir ) out lo gpio-81 (RF_CONN_DET_LTE_2 ) in lo gpio-84 (wcnss_gpios_5wire ) in lo gpio-85 (wcnss_gpios_5wire ) in lo gpio-86 (wcnss_gpios_5wire ) in lo gpio-87 (wcnss_gpios_5wire ) in lo gpio-88 (wcnss_gpios_5wire ) in lo gpio-93 (w1 ) in hi gpio-96 (EMU_MUX_CTRL1_GPIO ) out lo gpio-99 (HDMI_CEC_VAR ) in hi gpio-100 (HDMI_DDC_CLK ) in hi gpio-101 (HDMI_DDC_DATA ) in hi gpio-102 (HDMI_HPD ) in lo gpio-106 (nfc_irq ) in lo gpio-107 (EMU_MUX_CTRL0_GPIO ) out hi GPIOs 152-195, platform/pm8xxx-gpio, pm-gpio, can sleep: gpio-152 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-153 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-154 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-155 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-156 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-157 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-158 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-159 (-- ) in lo 0x05 0x10 0x24 0x30 0x40 0x50 gpio-160 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-161 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-162 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-163 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-164 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-165 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-166 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-167 (-- ) out lo 0x05 0x1a 0x2a 0x3c 0x44 0x50 gpio-168 (-- ) out lo 0x01 0x18 0x2a 0x35 0x46 0x58 gpio-169 (-- ) out lo 0x05 0x18 0x2a 0x38 0x40 0x58 gpio-170 (-- ) out lo 0x01 0x18 0x2a 0x35 0x46 0x58 gpio-171 (SD_HW_Detect) in lo 0x05 0x10 0x20 0x30 0x40 0x58 gpio-172 (DMINUS_GPIO ) out lo 0x0d 0x18 0x22 0x38 0x42 0x58 gpio-173 (TX_PAIR_GPIO) in hi 0x05 0x10 0x22 0x38 0x42 0x58 gpio-174 (SEMU_PPD_DET) in hi 0x0d 0x10 0x2a 0x3c 0x40 0x58 gpio-175 (red ) out lo 0x05 0x18 0x2a 0x34 0x46 0x58 gpio-176 (green ) out lo 0x05 0x18 0x2a 0x34 0x46 0x58 gpio-177 (blue ) out lo 0x05 0x18 0x2a 0x34 0x46 0x58 gpio-178 (-- ) out lo 0x07 0x19 0x2a 0x38 0x40 0x58 gpio-179 (-- ) out lo 0x01 0x18 0x2a 0x34 0x44 0x58 gpio-180 (-- ) out lo 0x05 0x10 0x2a 0x38 0x42 0x58 gpio-181 (-- ) out lo 0x07 0x18 0x2a 0x38 0x42 0x58 gpio-182 (-- ) out lo 0x01 0x18 0x2a 0x35 0x46 0x58 gpio-183 (-- ) out lo 0x01 0x18 0x2a 0x34 0x44 0x58 gpio-184 (VOLUME_DOWN ) in hi 0x05 0x10 0x20 0x30 0x40 0x58 gpio-185 (CDC_RESET ) out hi 0x05 0x19 0x2a 0x38 0x40 0x58 gpio-186 (SEMU_ALT_MOD) out lo 0x0d 0x18 0x2a 0x3d 0x40 0x58 gpio-187 (SIM_DET ) in lo 0x01 0x10 0x2a 0x35 0x46 0x58 gpio-188 (-- ) in lo 0x01 0x10 0x2a 0x35 0x46 0x58 gpio-189 (-- ) in hi 0x0d 0x10 0x2a 0x30 0x40 0x58 gpio-190 (-- ) in hi 0x05 0x10 0x2a 0x30 0x40 0x58 gpio-191 (-- ) out lo 0x01 0x18 0x2a 0x34 0x44 0x58 gpio-192 (DPLUS_GPIO ) in hi 0x0d 0x10 0x22 0x38 0x42 0x58 gpio-193 (RX_PAIR_GPIO) out lo 0x05 0x18 0x22 0x38 0x42 0x58 gpio-194 (disp_rst_n ) out lo 0x05 0x18 0x2a 0x34 0x40 0x58 gpio-195 (-- ) in lo 0x05 0x10 0x2a 0x35 0x46 0x58 GPIOs 196-207, platform/pm8xxx-mpp.0, pm8xxx-mpp, can sleep: gpio-196 (-- ) sink lo 0xa0 gpio-197 (-- ) d_out lo 0x3c gpio-198 (-- ) sink lo 0xa0 gpio-199 (-- ) d_out lo 0x3c gpio-200 (-- ) a_out lo 0x85 gpio-201 (-- ) sink lo 0xa0 gpio-202 (ext_5v_en ) d_out hi 0x25 gpio-203 (-- ) a_in lo 0x6c gpio-204 (DMB_PPD_DET_) d_in hi 0x10 gpio-205 (EMU_SCI_OUT_) d_in lo 0x10 gpio-206 (-- ) bi_dir lo 0x44 gpio-207 (-- ) bi_dir lo 0x51
Example downstream kernel cmdline:
oops=panic console=null androidboot.hardware=qcom user_debug=31 loglevel=1 androidboot.emmc=true androidboot.serialno=T025701P3K androidboot.baseband=msm androidboot.mode=normal androidboot.bootloader=0x109B battery= mot_sst=0 androidboot.carrier=sprint
Community Info
postmarketOS users that own the device
- Caleb (Notes: Cool slidey keyboard)
- Foldmorepaper (Notes: 1GB/8GB)
- Linmob
Maintainers
See also
- LineageOS Wiki: Info about xt897 (Motorola PHOTON Q 4G LTE)