Nokia 8000 4G (nokia-sparkler)

From postmarketOS
Nokia 8000 4G
Manufacturer Nokia
Name 8000 4G
Codename nokia-sparkler
Released 2020
Category testing
Original software KaiOS
Original version 2.5.4
Hardware
Chipset Qualcomm Snapdragon 210 (MSM8909)
CPU 4x 1.1 GHz Cortex-A7
GPU Adreno 304
Display 240x320 TFT
Storage 4 GB
Memory 512 MB
Architecture ARMv7
Type Feature Phone
Features
USB Networking
Works
Flashing
Works
Display
Works
WiFi
Works
FDE
Mainline
Works
Battery
Works
3D Acceleration
Audio
Bluetooth
Works
Camera
GPS
Mobile data
Works
Internal storage
SMS
Works
Calls
USB OTG
NFC
Sensors
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Built-in DVB
Camera Flash
Keyboard
Touchpad
USB-A
HDMI/DP
Ir TX
Ir RX
Stylus
Memory Card
Haptics
Ethernet
FOSS bootloader


Contributors

Users owning this device


Modem

Tested with ModemManager. You might need to tweak the timeout in /etc/conf.d/msm-modem-uim-selection to get the UIM to initialize.

Mainline

This device is supported by the msm8916-mainline kernel.

lk2nd (experimental-tmp branch) works with slight modifications, see the Installation section below.

Installation

Install the lk2nd branch from https://github.com/msm8916-mainline/lk2nd/pull/214 into the boot partition. After that, you can use pmbootstrap flasher commands to flash postmarketOS via the fastboot interface provided by lk2nd.

Because this lk2nd is based on the experimental-tmp branch and does not support fs-boot yet, pmbootstrap flasher flash_kernel is required even when booting from an SD card.

See also