Jump to content

NordicTrack C990 (nordictrack-c990)

From postmarketOS Wiki
NordicTrack C990
Manufacturer NordicTrack
Name C990
Codename nordictrack-c990
Model NTL19815
Released 2017
Type embedded
Hardware
Chipset Nexell S5P6818
CPU 8x 1.6 GHz Cortex-A53
GPU Mali-400MP
Display CHANGE_ME
Storage 4 GB + microSD
Memory 765 MB
Architecture aarch64
Software
Original software
The software and version the device was shipped with.
Android 5
postmarketOS
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
yes
pmOS kernel
The kernel version that runs on the device's port.
4.4.49
Unixbench score
Unixbench Whetstone/Dhrystone score. See Unixbench.
0.0

Contributors

Users owning this device

  • Leahanderson (Notes: haven't found a way to boot the kernel yet)


Installation

Using SD card

Flash the image to a microSD card, then plug it into the microSD slot and reboot the device.

Using pmbootstrap

Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select nordictrack as the vendor and c990 as the codename.

To flash the image to the device:

  • Enter flashing mode (see #How to enter flash mode)
  • Run pmbootstrap flasher flash_kernel to flash the kernel
  • Run pmbootstrap flasher flash_rootfs

Notes

A kernel has been successfully built, however, User:Leahanderson is still working on a way to boot the kernel.

The kernel source code can be found at https://github.com/jonmason/linux-s5p6818

See also