Nothing Phone 2 (nothing-pong)
Appearance
	
	
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. | 
|  Nothing Phone 2 | |
| Manufacturer | Nothing | 
|---|---|
| Name | Phone 2 | 
| Codename | nothing-pong | 
| Released | 2023 | 
| Type | handset | 
| Hardware | |
| Chipset | Qualcomm Snapdragon 8+ Gen 1 (SM8475) | 
| CPU | Octa-core (1x Cortex-X2 3.2 GHz 3x Cortex-A710 2.75 GHz 4x Cortex-A510 2 GHz) | 
| GPU | Adreno 730 | 
| Display | 2412 x 1080 (120Hz ~6.72" AMOLED) | 
| Storage | 128/258/512 GB | 
| Memory | 8/12 GB | 
| Architecture | aarch64 | 
| Software | |
| Original software The software and version the device was shipped with. | Android 13 | 
| Extended version The most recent supported version from the manufacturer. | Android 15 | 
| FOSS bootloader | no | 
| postmarketOS | |
| Category | testing | 
| Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. | yes | 
| Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. | 0.0 | 
| Flashing Whether it is possible to flash the device with  pmbootstrap flasher. | Works | 
|---|---|
| USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). | Works | 
| Internal storage eMMC, SD cards, UFS... | Works | 
| Battery Whether charging and battery level reporting work. | Works | 
| Screen Whether the display works; ideally with sleep mode and brightness control. | Works | 
| Touchscreen | Works | 
| Multimedia | |
| 3D Acceleration | Works | 
| Audio Audio playback, microphone, headset and buttons. | Broken | 
| Camera | Broken | 
| Camera Flash | Works | 
| Connectivity | |
| WiFi | Broken | 
| Bluetooth | Broken | 
| GPS | Broken | 
| NFC Near Field Communication | Works | 
| Modem | |
| Calls | Broken | 
| SMS | Broken | 
| Mobile data | Broken | 
| Miscellaneous | |
| FDE Full disk encryption and unlocking with unl0kr. | Untested | 
| USB OTG USB On-The-Go or USB-C Role switching. | Untested | 
| Sensors | |
| Accelerometer Handles automatic screen rotation in many interfaces. | Untested | 
| Magnetometer Sensor to measure the Earth's magnetism | Untested | 
| Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. | Untested | 
| Proximity | Untested | 
| Haptics | Broken | 
| This device is based on the Snapdragon 8+ Gen 1. See the SoC page for common tips, guides and troubleshooting steps | 
Contributors
Users owning this device
How to enter flash mode
Installation
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --fde