OnePlus 9RT (oneplus-martini)
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. Status: Boots Mainline - simple framebuffer only |
 OnePlus 9RT running PmOS with fbkeyboard | |
| Manufacturer | OnePlus |
|---|---|
| Name | 9RT |
| Codename | oneplus-martini |
| Model |
|
| Released | 2021 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 888 (SM8350) |
| CPU |
Octa-core (1x2.84GHz Cortex-X1 3x2.42GHz Cortex-A78 4x1.80GHz Cortex-A55) |
| GPU | Adreno 660 |
| Display | 1080x2400 AMOLED |
| Storage | 256GB |
| Memory | 8/12GB |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android (OxygenOS/ColorOS) 11 |
Extended version The most recent supported version from the manufacturer. |
Android (OxygenOS/ColorOS) 14 |
| postmarketOS | |
| Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
7.1.2 |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
9455.8 |
Initial MR Initial merge request. |
pmaports!8394 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS... |
Works
|
SD card Also includes other external storage cards. |
Untested
|
Battery Whether charging and battery level reporting work. |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Camera Flash |
Untested
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
GPS |
Broken
|
NFC Near Field Communication |
Broken
|
| Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Broken
|
USB OTG USB On-The-Go or USB-C Role switching. |
Broken
|
Fingerprint Fingerprint reader. |
Broken
|
Contributors
- flactwin
- Lyedok
Users owning this device
- Lyedok (Notes: Trying to port postmarketOS)
How to enter flash mode
Volume down and power button while the phone is powered off.
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernelto flash the kernel - Run
pmbootstrap flasher flash_rootfs