LG Optimus L5 (lg-e610)
(Redirected from Optimus-L5)
Jump to navigation
Jump to search
![]() LG Optimus L5 | |
Manufacturer | LG |
---|---|
Name | Optimus L5 |
Codename | lg-e610 |
Released | 2012 |
Category | testing |
Original software | Android 4.0.3 |
postmarketOS kernel | 3.4.0 |
Hardware | |
Chipset | Qualcomm Snapdragon S1 (MSM7225A) |
CPU | 800 MHz Cortex-A5 |
GPU | Adreno 200 |
Display | 320x480 |
Storage | 4 GB |
Memory | 512 MB |
Architecture | armv7 |
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen | |
Display |
Partial |
WiFi | |
FDE | |
Mainline | |
Battery | |
3D Acceleration | |
Audio | |
Bluetooth | |
Camera | |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG | |
NFC | |
Accelerometer | |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Camera Flash | |
---|---|
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX | |
Ir RX | |
Stylus | |
Haptics | |
Ethernet | |
FOSS bootloader | |
Contributors
- Nimayer
Maintainer(s)
- Nimayer
Users owning this device
How to enter flash mode
From off state, press and hold Volume UP + Power + Home, then release Power and hold the other two.
The phone will stay on the LG logo and show a black log screen once you connect the USB cable.
Internal memory Installation
Flashing via fastboot does not work, both commands
$ pmbootstrap flasher flash_rootfs $ pmbootstrap flasher flash_rootfs --partition userdata
Fail with:
[12:50:20] (native) flash rootfs image target didn't report max-download-size Sending 'userdata' (464896 KB)... FAILED (remote: data too large)
You can flash by recovery zip or SD card.
SD card Installation
- Build image (on your computer) and prepare the installation as usual
$ pmbootstrap init $ pmbootstrap build device-lg-e610 $ pmbootstrap install --sdcard=/dev/mmcblk0
- Put the phone in Fastboot mode and connect it to your computer
$ pmbootstrap flasher flash_kernel
See also
- pmaports!340 Initial merge request
- Device package
- Kernel package