Pine64-quartz64-a
Quartz64 A is development board with the RK3566 SoC produced by Pine64 for the Linux mobile community.
|
File:Pine64-quartz64-a.jpg The Quartz64 A | |
| Manufacturer | PINE64 |
|---|---|
| Name | Quartz64 A |
| Codename | pine64-quartz64-a |
| Released | 2021 |
| Type | single board computer |
| Hardware | |
| Chipset | Rockchip RK3566 |
| CPU | 4x 2Ghz Cortex-A55 |
| GPU | Mali G52 2EE |
| Memory | 8GB |
| Architecture | aarch64 |
| Software | |
| Original software | Unknown |
| postmarketOS | |
| Category | testing |
| Pre-built images | no |
| Mainline | yes |
| Flashing |
Works |
|---|---|
| USB Networking |
Works |
| Internal storage | |
| SD card | |
| Screen |
Works |
| Multimedia | |
| 3D Acceleration |
Works |
| Audio |
Works |
| Camera Flash | |
| Connectivity | |
| WiFi |
Works |
| Bluetooth |
Works |
| Ethernet |
Works |
| Miscellaneous | |
| FDE |
Works |
| USB-A |
Works |
| HDMI/DP |
Works |
| Haptics | |
Installation
The Quartz64 A board does not come with any nonvolatile storage. You can either install the image onto an uSD card or there's a special connector that allows eMMC breakout board to be attached. It has also an adapter for USB port which enumerates it as a USB mass storage device.
You should now see the postmarketOS splash and the Quartz64 A will boot.
Bootloader
The device runs on the mainline `u-boot`. However it can't be stated it's FOSS as it has the binary blobs to initialize the LPDDR4 memory and for the Secure world the ATF binaries.
Apart from that the rest is FOSS