Powkiddy X55 (powkiddy-x55)
Appearance
	
	
| Powkiddy X55 Powkiddy X55 | |
| Manufacturer | Powkiddy | 
|---|---|
| Name | X55 | 
| Codename | powkiddy-x55 | 
| Model | Powkiddy X55 | 
| Released | 2023 | 
| Type | handheld | 
| Hardware | |
| Chipset | Rockchip RK3566 | 
| CPU | Rockchip RK3566 4xCortex A55@1.8GHz | 
| GPU | Mali G52 | 
| Display | 5.5-inch 720x1280 IPS RGB Screen | 
| Storage | 8 GB internal MMC / 2 TF card slots | 
| Memory | 2 GN | 
| Architecture | aarch64 | 
| Software | |
| Original software The software and version the device was shipped with. | Android / Linux Android 7 / Rockchip BSP | 
| Extended version The most recent supported version from the manufacturer. | Android / Linux | 
| postmarketOS | |
| Category | testing | 
| Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. | yes | 
| pmOS kernel The kernel version that runs on the device's port. | 6.8.0 | 
| Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. | 2026.7 | 
| Device package |  device-powkiddy-x55 | 
| Kernel package |  linux-postmarketos-rockchip | 
| Flashing Whether it is possible to flash the device with  pmbootstrap flasher. | Untested | 
|---|---|
| USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). | Untested | 
| Internal storage eMMC, SD cards, UFS... | Works | 
| Battery Whether charging and battery level reporting work. | Untested | 
| Screen Whether the display works; ideally with sleep mode and brightness control. | Works | 
| Multimedia | |
| 3D Acceleration | Works | 
| Audio Audio playback, microphone, headset and buttons. | Works | 
| Connectivity | |
| WiFi | Works | 
| Bluetooth | Untested | 
| Miscellaneous | |
| FDE Full disk encryption and unlocking with unl0kr. | Untested | 
| USB-A Whether the full-sized USB-A port works. | Works | 
| HDMI/DP Video and audio output with HDMI or DisplayPort. | Untested | 
| This device is based on the Rockchip RK3566. See the SoC page for common tips, guides and troubleshooting steps | 
Contributors
- vognev
Users owning this device
How to enter flash mode
Installation
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --sdcard=/dev/mmcblk0
See also
- pmaports!4926 Initial merge request
- pmaports!4934 Suggested UI package for device
- pmaports!4936 Gamepad fix