Jump to content

Prestigio Multipad Wize 3151 (prestigio-pmt3151)

From postmarketOS Wiki
This device is unsupported by postmarketOS (most likely due to its architecture being unsupported, or limited system resources).

Reason: Mainline wasn't attempted yet
Prestigio Multipad Wize 3151
Manufacturer Prestigio
Name Multipad Wize 3151
Codename prestigio-pmt3151
Released 2018
Type tablet
Hardware
Chipset MediaTek MT8321
CPU 4 x 1.3 GHz Cortex-A7
GPU ARM Mali-400 MP2
Display 1280x800 10.1" IPS LCD
Storage 16 GB eMMC + microSD
Memory 1 GB
Architecture armv7
Software
Original software Android
Original version
The version the device was shipped with.
7.0 (Linux 3.18.35)
FOSS bootloader yes
postmarketOS
Category testing
Pre-built images
Whether pre-built images are available here.
no
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
no
pmOS kernel
The kernel version that runs on the device's port.
none
Unixbench score
Unixbench Whetstone/Dhrystone score. See Unixbench.
0.0
Features
Flashing
It is possible to flash the device with pmbootstrap flasher.
Broken
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Broken
Internal storage
eMMC, SD cards, UFS, ...
Broken
SD card
Also includes other external storage cards
Broken
Battery
Charging and battery level reporting works
Broken
Screen
Display works. Ideally with sleep mode and brightness control.
Broken
Touchscreen
Broken
Multimedia
3D Acceleration
Broken
Audio
Audio playback, microphone, headset and buttons.
Broken
Camera
Broken
Connectivity
WiFi
Broken
Bluetooth
Broken
GPS
Broken
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Broken
USB OTG
USB On-The-Go or USB-C Role switching
Broken
Sensors
Accelerometer
Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile
Broken
Haptics
Broken
U-Boot
Primary Bootloader
It is possible to replace stock bootloader with U-Boot.
Works
Secondary Bootloader
It is possible to chainload U-Boot from stock bootloader.
Works
Mainline
Latest versions of U-Boot are not broken and it is possible to use them.
Broken
Internal Storage
It is possible to boot from internal storage (e.g. eMMC or UFS).
Works
SD card
It is possible to boot from SD card.
Works
USB Host
It is possible to boot from a USB storage or connect a keyboard.
Broken
USB Peripheral
It is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode.
Broken
Display
Broken
Buttons
It is possible to navigate in boot menu or grub with volume and power buttons.
Broken

U-Boot port

U-Boot is actively developed for this device here: *link*

Installation

TBD

Community info

Users owning this device

See also