Realme C3 (realme-monet)
Appearance
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
Manufacturer | realme |
---|---|
Name | C3 |
Codename | realme-monet |
Released | 2020 |
Type | handset |
Hardware | |
Chipset | MediaTek Helio G70 (MT6769V) |
CPU | Octa-core (2x2.0 GHz Cortex-A75 6x1.7 GHz Cortex-A55) |
GPU | Mali-G52 MP2 @820 MHz |
Display | 1600x720 (60Hz) |
Storage | 32/64GB |
Memory | 3GB |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android (Realme UI) 10 |
Extended version The most recent supported version from the manufacturer. |
Android (Realme UI) 11 |
FOSS bootloader | no |
postmarketOS | |
Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
0.0 |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Untested
|
Internal storage eMMC, SD cards, UFS, ... |
Untested
|
Battery Charging and battery level reporting works |
Broken
|
Screen Display works. Ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Broken
|
Multimedia | |
3D Acceleration |
Broken
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Camera Flash |
Broken
|
Connectivity | |
WiFi |
Broken
|
Bluetooth |
Broken
|
GPS |
Broken
|
NFC Near Field Communication |
Broken
|
Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Magnetometer Sensor to measure magnetism |
Untested
|
Ambient Light |
Untested
|
Proximity |
Untested
|
Haptics |
Untested
|
Contributors
Users owning this device
How to enter flash mode
Installation
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --fde