Samsung Galaxy Grand Max (samsung-grandmax)

From postmarketOS Wiki
Note This page is about the dedicated port of this device. There is also an optional generic port available for this device - see Generic MSM8909 (qcom-msm8909).
Samsung Galaxy Grand Max
Phosh
Phosh
Manufacturer Samsung
Name Galaxy Grand Max
Codename samsung-grandmax
Released 2015
Type handset
Hardware
Chipset Qualcomm Snapdragon 410 (MSM8916)
CPU 4x 1.2 GHz Cortex-A53
GPU Adreno 306
Display 720 x 1280
Storage 16 GB
Memory 1.5 GB
Architecture armv7
Software
Original software Android
Original version 4.4
Extended version 5.1.1
postmarketOS
Category community
Pre-built images yes
postmarketOS kernel Mainline
Unixbench Whet/Dhry score 1084.5
Optional Generic Port Generic MSM8909 (qcom-msm8909)
Features
Flashing
Works
USB Networking
Works
Internal storage
SD card
Battery
Works
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
Works
Audio
Works
Camera
Broken
Camera Flash
Connectivity
WiFi
Works
Bluetooth
Works
GPS
Modem
Calls
Works
SMS
Works
Mobile data
Works
Miscellaneous
FDE
Works
USB OTG
Works
HDMI/DP
Sensors
Accelerometer
Partial
Ambient Light
Broken
Proximity
Broken
Haptics
Barometer
This device is based on the Snapdragon 410.
See the SoC page for common tips, guides and troubleshooting steps

Users owning this device


Architecture

Note Note: Even though MSM8916 is capable of aarch64, the firmware of some variants were never updated with aarch64 support. Therefore, this device can only boot mainline on armv7 at the moment.

Variants

Model Codename Architecture Supported lk2nd
SM-G7200 grandmaxltezc armv7 ? ?
SM-G7202 grandmax3gdd aarch64 ? ?
SM-G720AX grandmaxlteub armv7 Y Y
SM-G720N0 grandmaxltekx armv7 ? ?

Installation

lk2nd is a secondary bootloader that provides a standard fastboot interface, which can be used to boot postmarketOS without Android boot flashed or pmbootstrap flasher flash_kernel.

  1. Download lk2nd-msm8916.img from Releases page on Github.
  2. Boot your phone to bootloader (Odin/Download) mode by holding Volume Down and Home while powering up.
  3. Follow lk2nd instructions to install lk2nd. Basically flash it to the boot partition (heimdall flash --BOOT lk2nd-msm8916.img)
  4. Follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation to install postmarketOS.
Note Note: Enter lk2nd fastboot mode by pressing only Volume Down + Power (without Home). Pressing Home additionally will bring you to the Samsung Download mode.

Audio

Icon WARNING: The speakers are rather loud on 100% volume and may produce distorted sound that may damage your speakers after long use. Please make sure to use reasonable volumes - your ears and your speaker will thank you!

LEDs

The LEDs on the touchkey are gpio-leds, which can be controlled by subsystem leds and udev rules.

More information on LEDs handling can be found at: LEDs.

Battery

Actually a sec-fuelgauge with rt5033-battery driver.

Flash LED

Currently WIP. It can be controlled with SG Micro SGM3140 charge pump LED driver[1].

Accelerometer

lis2hh12 accelerometer is not so stable for auto screen rotation, which suggests you to use fixed portrait or landscape mode.

Ambient Light/Proximity Sensor

The driver for cm36686 ambient light/proximity sensor is not available.

See also

References