Samsung Galaxy Grand Prime Plus (samsung-grandpplte)
(Redirected from Samsung Galaxy Grand Prime+ (samsung grandpplte))
Jump to navigation
Jump to search
USB Networking |
Broken |
---|---|
Flashing |
Works |
Touchscreen |
Broken |
Display |
Partial |
WiFi |
Broken |
Xwayland | |
FDE |
Broken |
Mainline |
Works |
Battery |
Broken |
3D Acceleration |
Broken |
Audio |
Broken |
Bluetooth |
Broken |
Camera |
Broken |
GPS |
Broken |
Mobile data |
Broken |
SMS |
Broken |
Calls |
Broken |
USB OTG |
Broken |
NFC |
Unavailable |
Accelerometer |
Broken |
---|---|
Magnetometer |
Unavailable |
Ambient Light |
Unavailable |
Proximity |
Broken |
Hall Effect |
Unavailable |
Ir TX |
Unavailable |
---|---|
TrustZone |
Broken |
![]() |
Note: This page is about Samsung Galaxy Grand Prime Plus, also known as Galaxy J2 Prime based on MediaTek MT6737T. For Qualcomm MSM8916 variants, see Galaxy Grand Prime. |
Contributors
- Tooniis
Users owning this device
- Tooniis (Notes: SM-G532F)
How to enter flash mode
While turned off, hold Power+Home+Volume Down, then a menu will appear. Press Volume Up to proceed to flash mode.
UART
Accessing UART is possible through the microUSB port by putting a 619kΩ resistor between the ID pin and ground. Read Serial debugging for more on that. Baud rate is 115200.
Status
Downstream kernel boots to a black screen.
Building with the Android arm-eabi-4.8
toolchain makes it work, but it can't be integrated into pmaports in this state.
Mainline
It is starting to work, but it still is in a really early stage. Secondary core bringup is broken, and simple framebuffer works.