Samsung Galaxy J1 mini (samsung-j1minilte)
Appearance
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. Status: flash, boot bug |
![]() Device | |
Manufacturer | Samsung |
---|---|
Name | Samsung Galaxy J1 Mini 4G |
Codename | j1minilte |
Model | SM-J105F/DS |
Released | 2016 |
Type | handset |
Hardware | |
Chipset | Spreadtrum SC9830 |
CPU |
Quad-core 1 5 GHz Cortex-A7 |
GPU | ARM Mali-400 MP2 |
Display | 480 x 800 TFT |
Storage | 8 GB |
Memory | 1 GB |
Architecture | armv7 |
Software | |
Original software The software and version the device was shipped with. |
Android 5.1 |
Extended version The most recent supported version from the manufacturer. |
Android |
postmarketOS | |
Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
3.10.65 |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
0.0 |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Partial
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS, ... |
Untested
|
SD card Also includes other external storage cards |
Untested
|
Battery Charging and battery level reporting works |
Partial
|
Screen Display works. Ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
Multimedia | |
3D Acceleration |
Untested
|
Built-in DVB TV tuner/DVB device |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Camera Flash |
Untested
|
IR TX |
Untested
|
IR RX |
Untested
|
Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
NFC Near Field Communication |
Untested
|
Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Untested
|
HDMI/DP Video and audio output with HDMI or Display Port works. |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Magnetometer Sensor to measure magnetism |
Untested
|
Ambient Light |
Untested
|
Proximity |
Untested
|
Hall Effect Also known as flip cover sensor |
Untested
|
Barometer Sensor to measure air pressure |
Untested
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Untested
|
Contributors
Users owning this device
- Latestofmymind (Notes: Old Phone)
How to enter flash mode
Installation
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --fde