Samsung Galaxy S10e (samsung-beyond0lte)
Appearance
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
Manufacturer | Samsung |
---|---|
Name | Galaxy S10e |
Codename | samsung-beyond0lte |
Released | 2019 |
Type | handset |
Hardware | |
Chipset | Samsung Exynos 9820 |
CPU |
Octa-core Exynos M4 2x 2.31 4 x 1.95 GHz |
GPU | Mali-G76 MP12 |
Display | 2280×1080 Dynamic AMOLED |
Storage | 128 / 256 GB |
Memory | 6/8 GB LPDDR4X-4266 |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android 9 |
Extended version The most recent supported version from the manufacturer. |
Android 12 |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
Flashing It is possible to flash the device with pmbootstrap flasher . |
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
|
Battery Charging and battery level reporting works |
|
Screen Display works. Ideally with sleep mode and brightness control. |
|
Touchscreen |
|
Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Connectivity | |
WiFi |
|
Bluetooth |
Untested
|
GPS |
Untested
|
NFC Near Field Communication |
Untested
|
Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Contributors
- MoralCode
Users owning this device
- Eisenbahnfan2015 (Notes: Unlocked - Running iodéOS - Main phone)
- Wann (Notes: Unlocked - Running Lineage OS 22 - Play phone)
- Zvava (Notes: two of them - main phone (lineage 22.1 microG) - old phone only charges wirelessly)
How to enter flash mode
The following info was copied from the wikipage for Samsung S10 and should be the same but hasnt been tested
- Bootloder/Download mode: With the device powered off, hold
Volume Down
+Bixby
and connect USB cable to PC. - Recovery: Reboot and immediately hold
Volume Up
+Bixby
+Power
while the device is connected to a PC via USB cable.
Installation
Additional info
Unixbench results
======================================================================== BYTE UNIX Benchmarks (Version 5.1.3) .... TODO ..... System Benchmarks Index Score (Partial Only)