Samsung Galaxy S22+ 5G (samsung-g0s)
Appearance
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
![]() Samsung Galaxy S22+ 5G on a close to mainline kernel | |
Manufacturer | Samsung |
---|---|
Name | Galaxy S22+ 5G |
Codename | samsung-g0s |
Model | S906B |
Released | 2022 |
Type | handset |
Hardware | |
Chipset | Samsung Exynos 2200 |
CPU |
1x 3.0GHz (Cortex-X2) 3x 2.5GHz (Cortex-A710) 4x 1.8GHz (Cortex-A510) |
GPU | Samsung Xclipse 920 |
Display | 6.6", 1080 x 2340 pixels, touchscreen, Super AMOLED |
Storage | 128GB/256GB |
Memory | 8GB |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android 12 |
Extended version The most recent supported version from the manufacturer. |
Android 15 |
postmarketOS | |
Category | testing |
Pre-built images Whether pre-built images are available from the postmarketOS Installation page. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Flashing Whether it is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS... |
Broken
|
Battery Whether charging and battery level reporting work. |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Works
|
Multimedia | |
3D Acceleration |
Broken
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Camera Flash |
Untested
|
Connectivity | |
WiFi |
Broken
|
Bluetooth |
Broken
|
GPS |
Broken
|
NFC Near Field Communication |
Untested
|
Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching. |
Broken
|
Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Proximity |
Untested
|
Haptics |
Untested
|
Barometer Sensor to measure air pressure |
Untested
|
Contributors
Users owning this device
How to enter flash mode
First, turn off the device and then:
- Download Mode: Hold the , and buttons while the device is connected to a computer with an USB cable.
- Recovery Mode: Hold the and buttons while the device is connected to a computer with an USB cable.
Installation
Port not upstreamed yet
uniLoader
This device has trouble booting mainline Linux because Samsung uses device tree fragments, and the combined device tree can disrupt the boot process. To address this, we use a secondary bootloader called uniLoader, which we have specifically adapted for the S22+. Standard bootloaders are not supported. Only uniLoader will work here.