Samsung Galaxy S4 Value Edition (samsung-jfvelte)
 Samsung Galaxy S4 Value Edition | |
| Manufacturer | Samsung |
|---|---|
| Name | Galaxy S4 Value Edition |
| Codename | samsung-jfvelte |
| Released | 2014 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 600 (APQ8064T) |
| CPU | 4x 1.9 GHz Krait 300 |
| GPU | Adreno 320 |
| Display | 1080x1920 AMOLED |
| Storage | 16 GB, microSD |
| Memory | 2 GB |
| Architecture | armv7 |
| Software | |
| Original software | Android |
| Original version | 4.4.2 |
| postmarketOS | |
| Category | testing |
| Pre-built images | no |
| Mainline | partial |
| Flashing |
Works |
|---|---|
| USB Networking |
Works |
| Internal storage | |
| SD card | |
| Battery | |
| Screen |
Works |
| Touchscreen |
Works |
| Multimedia | |
| 3D Acceleration | |
| Audio | |
| Camera | |
| Camera Flash | |
| Connectivity | |
| WiFi |
Works |
| Bluetooth | |
| GPS | |
| NFC | |
| Modem | |
| Calls | |
| SMS | |
| Mobile data | |
| Miscellaneous | |
| FDE |
Partial |
| USB OTG | |
| HDMI/DP | |
| Sensors | |
| Accelerometer | |
| Magnetometer | |
| Ambient Light | |
| Proximity | |
| Hall Effect | |
| Haptics | |
| Barometer | |
| This device is based on the Qualcomm Snapdragon 600. See the SoC page for common tips, guides and troubleshooting steps |
This wiki page concerns the Samsung Galaxy S4 Value Edition, sold in select areas like The Netherlands. It is structurally the same phone as the Galaxy S4.
The only differences between the two phones appear to be mostly related to the software. The Value Edition ships with a Android 4.4 (instead of Android 4.2). In addition, the VE appears to have a different WLAN module (the Qualcomm Atheros Prima instead of the Broadcom 4335 featured in the stock S4).[1]
Contributors
Maintainer(s)
Users owning this device
- Newblicious
- Teeuwen (Notes: No battery)
- Ungeskriptet (Notes: Cracked glass)
How to enter flash mode
Press volume down + power button to enter Download Mode.
Installation
Follow the Installation guide
Issues
FDE is working. osk-sdl is not using the correct colors however, this issue has to be further investigated. Charging with charging-sdl seems to work, but this hasn't been properly tested yet.
Hardware status (Mainline)
| Component | Model | Status | Notes |
|---|---|---|---|
| MicroUSB | USB 2.0 | Y | |
| eMMC | Toshiba 016G94 | Y | |
| Charging | Maxim MAX77693 | N | Driver available in mainline |
| Volume/Power/Home keys | GPIO | N | |
| Touchscreen | Synaptics rmi4 | N | |
| Capacitive keys | Cypress Touchkey | N | |
| Gyroscope/Accelerometer | STMicroelectronics K330 | N | |
| Proximity sensor | Maxim MAX88920 | N | |
| Color sensor | Capella CM3323 | N | Driver available in mainline |
| Magnetometer | Yamaha YAS532 | N | Driver available in mainline |
| Display | Samsung SDC_AMS499QP01 | N | Could also be S6E8FA0, which has some sort of driver |
| Audio | apq8064tablasnd | N | |
| GPU | Adreno 320 | N | Needs firmware |
| Wi-Fi/Bluetooth | Qualcomm Atheros Prima (WCN3660) | N | Needs firmware |
| LED Flash | Panasonic AN30259A | N | Driver available in mainline |
| NFC | Broadcom BCM2079x | N | bcm2079x-i2c |
| GPS | Qualcomm | N | |
| Modem | Qualcomm MDM9215M | N | |
| Front camera | Samsung CMOS S5K6B2 | N | |
| Main camera | Fujitsu M10MO | N |
See also
- pmaports!1841 Initial merge request
- LineageOS device repo
- Device package
- Kernel package
- WIP mainline kernel