Samsung Galaxy S III (samsung-m0)

From postmarketOS Wiki
Samsung Galaxy S III
Samsung Galaxy S III
Samsung Galaxy S III
Manufacturer Samsung
Name Galaxy S III
Codename samsung-m0
Released 2012
Type handset
Hardware
Chipset Samsung Exynos 4412 Quad
CPU Quad-core 1.4 GHz Cortex-A9
GPU Mali 400 MP4
Display 720x1280 Super AMOLED
Storage 16 GB/32 GB
Memory 1 GB (GT-i9300 & SHW-M440S)
Architecture armv7
Software
Original software Android
Original version 4.1.1
FOSS bootloader partial
postmarketOS
Category community
Pre-built images yes
Features
Flashing
Works
USB Networking
Partial
Internal storage
Works
SD card
Works
Battery
Works
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
Works
Audio
Partial
Camera
Camera Flash
Connectivity
WiFi
Works
Bluetooth
Partial
GPS
Broken
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
Works
USB OTG
Works
HDMI/DP
Partial
Sensors
Accelerometer
Works
Magnetometer
Ambient Light
Works
Proximity
Hall Effect
U-Boot
Primary Bootloader
Works
Mainline
Broken
Internal Storage
SD card
USB Host
USB Peripheral
Display
Buttons

Contributors

Maintainer(s)

Basic Info

So far, what works for Samsung Galaxy S III LTE (samsung-m3) also works for the samsung-m0 (Galaxy S III international GSM version without LTE, Also known as Galaxy S III 3G SHW-M440S in South Korea) and samsung-shv-e210s (a Korean variant). (None of these S III models should be confused with the North American S III models, which require OS builds.)

Code name is MIDAS. Search for midas-mainline to find more info.

Users owning this device


How to enter flash mode

  • Hold power + Home + volume down
  • When prompted, release all buttons and press volume up

Installation

Step 1: Flash the system to an SD card

Note Note: You can technically flash postmarketOS to your internal storage instead of an SD card, but there's no easy way to do this on samsung-m0 at the moment

Start by flashing a pre-built postmarketOS rootfs image onto an SD card, as described in the installation article.

Step 2: Enter ODIN mode

To enter ODIN mode, follow these steps:

 1. Turn off phone
 3. Hold Volume Down + Home + Power until you get Warning!! screen
 2. Connect USB cable
 4. Push Volume up to continue to ODIN mode screen

Step 3: Flash the kernel via ODIN mode

Now, use Heimdall to flash the image with -boot at the end to your boot partition. Make sure that you extract it before flashing it (the downloaded file is a compressed .tar.xz archive).

Flash it with this command:

heimdall flash --BOOT <Decompressed image filename> --verbose

Note that it's important to write BOOT in all capitalised letters, as otherwise you will get an error about the partition not being found in the PIT.

After that's done, your device should now automatically reboot into postmarketOS!

WiFi

As of pmaports!2556, WiFi should "just work" (on mainline).

If WiFi networks show up but you can't connect to them, you can try using the nvram for samsung-m3/i9305. This is a hack and not necessarily endorsed, but at least one user has reported that their samsung-m0/i9300 needs this for WiFi to work. We would like to handle this better, but currently we don't have any way of doing this.

To switch to the nvram meant for samsung-m3, run this command:

$ cd /lib/firmware/brcm
$ sudo mv brcmfmac4334-sdio.samsung,i9300.txt brcmfmac4334-sdio.samsung,i9300.txt.bak
$ sudo ln -sf brcmfmac4334-sdio.samsung,i9305.txt brcmfmac4334-sdio.samsung,i9300.txt

If it still refuses to connect, you might want to try replacing the contents of /lib/firmware/bcrm/brcmfmac4334-sdio.samsung,i9300.txt with the nvram from LineageOS. Apparently this is necessary on some British i9300 models.

Related issue: pmaports#1571

Video out

Samsung Galaxy S III providing video out to a TV through an original Samsung dock (model name: EDD-S20EWE).

Video out should work as long as you use an 11pin MHL cable or dock (safest option would be an original Samsung dock/adapter from the time period, Samsung's EDD-S20EWE is known to work).

In 2022-09, all hdmi related nodes were disabled (pmaports!3395) as the kernel driver reports the wrong state, and this led to the Phosh stack not starting up. A WIP to fix issue can be found at gitlab.com/exynos4-mainline/linux/-/tree/m0-mhl-fixes.

Battery

With mainline, battery reporting works as of pmaports!2423, and charging works as of pmaports!2546. Charging allegedly randomly stops, but should that happen you can just unplug and re-plug the cable. Charging is also very slow and the device will probably lose power if you use it while charging.

Battery reporting and charging via postmarketOS does not work on the downstream kernel - the device gets stuck on whatever percentage it was on boot (although it does charge in recovery mode)

Modem

The modem does not work in postmarketOS. That said, there was some work done to enable the modem on the i9300 variant of this device. It can be found here: https://github.com/fourkbomb/linux/tree/modem. Note that even if you apply this, you would likely need userspace patches as well for calls and mobile data to be usable.

Audio

Audio mostly works. Notable omissions are input from the main microphone and headset audio out.

GPS

The Galaxy S III uses Broadcom BCM4751 GPS.

Miscellaneous mainline kernel information

The kernel package for this device in postmarketOS is linux-postmarketos-exynos4PMOS. The patches can be found in the exynos4-mainline/linux repository on GitLab.

A large part of the mainlining process was done by forkbomb; see Midas on Mainline.

The Replicant project also provides good mainline support for the Galaxy S III; they have expressed intent to collaborate with us. Their support matrix can be found on their wiki. Relevant links:

Upstream DTS: exynos4412-i9305.dts

Alternative bootloaders

Modem support

Replicant supports the modem on mainline Linux, and they're working on getting the i9300 modem working with a mainline kernel in a way that pmOS can also utilize: https://redmine.replicant.us/issues/1954 https://git.replicant.us/contrib/GNUtoo/kernel_replicant_linux/log/?h=replicant-11-i9300-modem

The Qualcomm Gobi MDM9615 Modem seems to have mainline kernel support as well: https://redmine.replicant.us/projects/replicant/wiki/GalaxyS3I9305#Hardware-table

LTE modem support with the mainline kernel on Replicant is being done here: https://redmine.replicant.us/issues/2206 The Note II discussed here has the same or very similar modem as the i9305.

Warnings and considerations

Power

It used to be that the battery percentage wasn't properly monitored and would get stuck at a set percentage at boot. While this was the case, the phone would not shut down when battery levels went too low, which could make the phone behave strangely on significantly worn batteries (in the ballpark of 50% wear). There are theories that this may have caused hardware failure for one user, but this is not proven. Battery level reporting has since been fixed, but it has not been extensively tested for reliability, so we recommend that you try to not let your phone's battery percentage fall too low. It should shut down on its own before anything adverse can happen, however.

See pmaports#1115 for more information.

eMMC firmware bugs

Replicant has a good article about this: https://redmine.replicant.us/projects/replicant/wiki/EMMCFirmwareBugs

Heimdall does not consider partition sizes when flashing

See Heimdall#494

See also