Samsung Galaxy Tab S3 lte (sm-t825)
File:Sm-t825.jpg CHANGE_ME | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Tab S3 LTE |
Codename | sm-t825 |
Released | 2017 |
Category | testing |
Pre-built images | no |
Original software | Android |
Original version | 7.0 |
Hardware | |
Chipset | Qualcomm Snapdragon 820 (MSM8996) |
CPU | Quad-core (2x2.15 GHz Kryo & 2x1.6 GHz Kryo) |
GPU | Adreno 530 |
Display | 1536x2048 (264 PPI) HD Super AMOLED |
Storage | 32 GB eMMC |
Memory | 4 GB |
Architecture | AArch64 |
This device is marked as not booting.
USB Networking | |
---|---|
Flashing |
Partial |
Touchscreen | |
Display | |
WiFi | |
FDE | |
Mainline | |
Battery | |
3D Acceleration | |
Audio | |
Bluetooth | |
Camera | |
GPS | |
Mobile data | |
Internal storage | |
SMS | |
Calls | |
USB OTG | |
NFC | |
Accelerometer | |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Built-in DVB | |
---|---|
Camera Flash | |
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX | |
Ir RX | |
Stylus | |
Memory Card | |
Haptics | |
Ethernet | |
FOSS bootloader | |
Contributors
3.6roentgen
Maintainer(s)
Users owning this device
How to enter flash mode
- Turn the device completely off.
- From a turned off device, press Power, volume down and home buttons at the same time. The blue interface of "download mode" will appear, press volume up to enter the mode.
- connect the device to a PC via USB.
Installation
At this moment, installation of rootFs fails. When specifying the partition for rootFs (SYSTEM) heimdall fails the flash at 8%. This is usually fixed by configuring "sparse images" in APKBUILD, altough this doesn't seem to be doing anything. When flashing rootFs to RECOVERY partition flash fails at 94%.