Samsung Galaxy Y (samsung-totoro)
 |
WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) pmaports#599 has been considering dropping it. The processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly. |
 | |
| Manufacturer | Samsung |
|---|---|
| Name | Galaxy Y |
| Codename | samsung-totoro |
| Model | GT-S5360 |
| Released | 2011 |
| Hardware | |
| Chipset | Broadcom BCM21553 |
| CPU | 830 MHz ARMv6 |
| GPU | VideoCore IV |
| Display | 240x320 |
| Storage | 512 MB |
| Memory | 384MB |
| Architecture | armhf |
| Software | |
| Original software | Android |
| Original version | 2.3 |
| postmarketOS | |
| Category | testing |
| Pre-built images | no |
This device is marked as not booting.
Status: kernel compiles, can't flash normally although flashing the boot.img through TWRP seems to work, does not boot
Status: kernel compiles, can't flash normally although flashing the boot.img through TWRP seems to work, does not boot
Users owning this device
- Bastindo (Notes: 2x, running CM9 rom)
- Brad1111
- Buildingat90degreesC
- Deviled (Notes: Running Lineage OS 9)
- Fireman112 (Notes: Broken screen and volume buttons)
- Knuxify
- Lostnet (Notes: cyanogenmod 11.0)
- Notnoelchannel
- Pinoaffe (Notes: twice)
- Santeri3700 (Notes: x1)
- ULumia
How to enter flash mode
Power+Vol+Up - recovery Power+Vol+Down - odin/download
Installation
Run pmbootstrap install (without installing to the SD card, since we need it to store the boot.img for flashing), run pmbootstrap export, flash the boot.img manually through TWRP, then reinstall to SD card.
Android ZIP install errors out, heimdall doesn't work due to a different flashing protocol.
Note: pmOS does not fit on the system partition. You have to use an SD card.
Boot gets stuck on Galaxy Y logo. No USB output. (TODO: Does maximum-attention work?)
Misc. info
VFP support
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
/proc/cpuinfo
Processor : ARMv6-compatible processor rev 5 (v6l) BogoMIPS : 832.90 Features : swp half thumb fastmult vfp edsp java CPU implementer : 0x41 CPU architecture: 6TEJ CPU variant : 0x1 CPU part : 0xb36 CPU revision : 5 Hardware : BCM21553 ThunderbirdEDN31 platform Revision : 0000 Serial : 0000000000000000
Parts list
| Element type | Element | Works? | Notes |
|---|---|---|---|
| Chipset | BCM21553 | Not supported in mainline (...yet :) ) | |
| Graphics | Videocore IV | Supported in upstream Mesa. | |
| PMIC, USB switch, etc. | MAX8986 | Not in mainline, as far as I can tell | |
| Display driver | ILI9341 | Supported in mainline as a drm panel. | |
| Touchscreen | Silabs F760, Cypress TMA140 | TMA140 is supported, F760 is not. (On my device, the F760 appears to be used.) | |
| WiFi, Bluetooth | BCM4330 | Driver in mainline | |
| Backlight | Skyworks AAT1401 | Not in mainline | |
| Camera | Siliconfile SR200PC10 | Not in mainline | |
| Proximity/ambient light sensor | Sharp GP2A??? | Not 100% sure which one; either way, should be supported in mainline | |
| Accelerometer, magnetometer | Bosch BMA222, MEMSIC MMC328X | BMA222 is in mainline, MMC328X is not; there do seem to be other MEMSIC magnetometers in mainline, maybe they're similar? |