Samsung Galaxy Young (samsung-royss)

Features
Flashing Whether it is possible to flash the device with pmbootstrap flasher.	Works
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).	Works
Battery Whether charging and battery level reporting work.	Works
Screen Whether the display works; ideally with sleep mode and brightness control.	Works
Touchscreen	Works
Multimedia
3D Acceleration	Untested
Audio Audio playback, microphone, headset and buttons.	Partial
Camera	Untested
Connectivity
WiFi	Partial
Bluetooth	Untested
GPS	Untested
Modem
Calls	Untested
SMS	Untested
Mobile data	Untested
Miscellaneous
FDE Full disk encryption and unlocking with unl0kr.	Works
Sensors
Accelerometer Handles automatic screen rotation in many interfaces.	Untested

Samsung Galaxy Young
	; Samsung Galaxy Young running Xfce.
Manufacturer	Samsung
Name	Galaxy Young
Codename	samsung-royss
Released	2013
Type	handset
Hardware
Chipset	Qualcomm Snapdragon S1 (MSM7625A)
CPU	Qualcomm Snapdragon S1 1GHz Cortex A5
GPU	Adreno 200
Display	320x480 TFT
Storage	4GB
Memory	768MB
Architecture	armv7
Software
Original software The software and version the device was shipped with.	Android 4.1.2 (Linux 3.4.0)
Extended version The most recent supported version from the manufacturer.	Android
postmarketOS
Category	archived
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.	no
Device package	device-samsung-royss
Kernel package	linux-samsung-royss

This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken.
It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually.

Contributors

fireman112

Maintainer(s)

Users owning this device

DTBTech (Notes: Holy e-waste, running android 4.4)
Eldyj (Notes: Untested with PMOS)
Etam
Fireman112 (Notes: Broken power IC)

How to enter flash mode

Press and hold Home + Volume Down + Power until confirmation dialog appear, then press Volume Up to confirm.

Installation

See Installation guide.

What works

Booting
USB Networking
Flashing
Touchscreen
SD Card installation
Proximity sensor

What does not work

~~Touchscreen on wayland, kwin, i3wm (see issues below)~~

Not tested

~~WiFi (need kernel modules)~~ WiFi works but see issues below
Bluetooth
Accelerometer

Issues

Audio output only on earpiece (need config?)
Starting PulseAudio causes a reboot
WiFi works if the kernel modules compiled with gcc4 and needs firmware (I haven't package it yet)