Samsung Galaxy Z Flip 5 (samsung-b5q)
Appearance
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
![]() Samsung Galaxy Z Flip 5 booting a mainline kernel | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Z Flip 5 |
Codename | samsung-b5q |
Model | SM-F731B |
Released | 2023 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 8 Gen 2 (SM8550) |
CPU |
Octa-core (1x3.36 GHz Cortex-X3 2x2.8 GHz Cortex-A715 2x2.8 GHz Cortex-A710 3x2.0 GHz Cortex-A510) |
GPU | Adreno 740 @ 818MHz |
Display | 6.7", 1080 x 2640 pixels, touchscreen |
Storage | 256GB/512GB |
Memory | 8GB |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android 13 |
Extended version The most recent supported version from the manufacturer. |
Android 16 |
postmarketOS | |
Category | testing |
Pre-built images Whether pre-built images are available here. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
6.17.0-rc3 |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Partial
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Untested
|
Internal storage eMMC, SD cards, UFS, ... |
Untested
|
Battery Charging and battery level reporting works |
Partial
|
Screen Display works. Ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Untested
|
Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Camera Flash |
Untested
|
Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Broken
|
NFC Near Field Communication |
Untested
|
Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Broken
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Proximity |
Untested
|
Haptics |
Untested
|
Barometer Sensor to measure air pressure |
Untested
|
Contributors
Testers
Users owning this device
- Arthurus36 (Notes: flip much?)
How to enter flash mode
First, turn off the device and then:
- Download Mode: Hold the , and buttons while the device is connected to a computer with an USB cable.
- Recovery Mode: Hold the and buttons while the device is connected to a computer with an USB cable.
Installation
Port not upstreamed yet;