SiFive HiFive Premier P550 (sifive-hifive-premier-p550)
Appearance
| This device is marked as not booting. |
|
SiFive HiFive Premier P550 Development Board | |
| Manufacturer | SiFive |
|---|---|
| Name | HiFive Premier P550 |
| Codename | sifive-hifive-premier-p550 |
| Released | 2022 |
| Type | desktop |
| Hardware | |
| Chipset | ESWIN EIC7700X |
| CPU | 4x SiFive P550 @ 1.4 GHz |
| GPU | AXM‑8‑256 |
| Storage | 128GB eMMC, SATA, microSD |
| Memory | 16GB / 32GB LPDDR5 |
| Architecture | riscv64 |
| Software | |
Original software The software and version the device was shipped with. |
Ubuntu 24.04 |
Extended version The most recent supported version from the manufacturer. |
Ubuntu |
| FOSS bootloader | no |
| postmarketOS | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
- 4x SiFive P550 Hearts
- RV64IMACFDC
- 32KB Instruction Cache per core
- 32KB Data Cache per core
- 256KB L2 Cache per core
- 1.5GHz maximal operating speed
- SV39 Virtual Memory Support
- 4MB Coherent Banked L3 Cache
- IMG AXM-8-256 GPU
- Unknown Display Controller
- Unknown HDMI Transmitter
- 4-Lane PCIe Gen 3 root port (Synopsys IP)
- 2x Gigabit Ethernet (Synopsys IP)
- USB 3.0 Root Hub
- Single Synopsys AHCI Compliant SATA connector
Contributors
Users owning this device
How to enter flash mode
Installation
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernelto flash the kernel - Run
pmbootstrap flasher flash_rootfs