Sipeed Lichee Pi Zero (sipeed-licheezero)
| This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken. It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually. |
 Sipeed Lichee Pi Zero running postmarketOS | |
| Manufacturer | Sipeed |
|---|---|
| Name | Lichee Pi Zero |
| Codename | sipeed-licheezero |
| Released | 2017 |
| Type | single board computer |
| Hardware | |
| Chipset | Allwinner V3s |
| CPU | 1x 1.2 GHz Cortex-A7 |
| GPU | - |
| Storage | SD |
| Memory | 64 MB |
| Architecture | armv7 |
| Software | |
Original software  The software and version the device was shipped with. |
Linux |
Extended version The most recent supported version from the manufacturer. |
Linux |
| postmarketOS | |
| Category | archived |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
5.15 |
| Device package |
 device-sipeed-licheezero |
| Kernel package |
linux-postmarketos-allwinner |
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Broken
|
|---|---|
| Multimedia | |
Audio Audio playback, microphone, headset and buttons. |
Untested
|
| Miscellaneous | |
USB OTG USB On-The-Go or USB-C Role switching. |
Untested
|
Users owning this device
- Icenowy (Notes: initial porter)
Serial console
There's uart0 on the pins marked U0T R right beside i2c0. The speed is 115200.
See also
- pmaports!2843 Initial merge request