Sony Xperia Z3+ (sony-ivy)
Appearance
This device runs a Downstream kernel. Some UIs will not work, and most features (3D acceleration, audio, etc.) may be broken. |
![]() Xperia Z3+ | |
Manufacturer | Sony |
---|---|
Name | Xperia Z3+ |
Codename | sony-ivy |
Released | 2015 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 810 (MSM8994) |
CPU |
Octa-core (4x 1.5GHz Cortex-A53 4x 2.0GHz Cortex-A57) |
GPU | Adreno 430 |
Display | 1080x1920 5.2" IPS LCD |
Storage | 32GB |
Memory | 3GB |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Android 5.0.1 |
Extended version The most recent supported version from the manufacturer. |
Android |
postmarketOS | |
Category | downstream |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
Device package |
![]() |
Kernel package |
![]() |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Charging and battery level reporting works |
Partial
|
Screen Display works. Ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
Multimedia | |
3D Acceleration |
Broken
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Connectivity | |
WiFi |
Works
|
Bluetooth |
Untested
|
GPS |
Untested
|
Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Contributors
- MollySophia
Users owning this device
How to enter flash mode
Enter Developer options on Android and enable OEM Unlock
Unlock your bootloader by following instructions here: https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/
Hold Vol+ and plug USB cable into a computer and the phone. The LED will change to blue. Congratulations, you've entered fastboot.
Installation
Just your standard "pmbootstrap flasher" procedure
See also
- pmaports!2864 Initial merge request