Jump to navigation
Jump to search
← Older edit
Newer edit →
User:Knuxfanwin8/Serial debugging concept page
Revision as of 21:18, 12 November 2020
303 bytes added
21:18, 12 November 2020
add info about automatic bootup on jig insertion
Plug '''the TX (output) wire''' from your cable '''to the RX (input) line''' on your adapter. (You'll need to do the reverse - RX to TX - if you want to connect the TX line.)
Then, plug the other end of the cable into your device. Some devices may automatically boot up when the jig is plugged in - if your device starts up without you pressing the power button when you plug the cable in, it means that the resistance is being detected and the serial mode has been triggered.
==Connecting to the serial console from your computer==
Retrieved from "
View user groups
The usual wiki links