StarFive VisionFive 2 (starfive-visionfive2)
 Board shot of the VisionFive 2 SBC | |
| Manufacturer | StarFive |
|---|---|
| Name | VisionFive 2 |
| Codename | starfive-visionfive2 |
| Released | 2022 |
| Type | single board computer |
| Hardware | |
| Chipset | StarFive JH7110 |
| CPU | Quad-core RV64GC (4x SiFive U74 @ 1.5 GHz) |
| GPU | IMG BXE-4-32 MC1 @ 600 MHz |
| Display | 1x HDMI 2.0 port, 1x 4-lane MIPI DSI, 1x 2-lane MIPI DSI |
| Storage | M.2 2280 M-key SSD slot (PCIe 2.0 x1 lane), eMMC socket, microSD slot |
| Memory | 2/4/8 GB LPDDR4 @ 2800 MHz |
| Architecture | riscv64 |
| Software | |
| Original software | Debian |
| Optional software | Ubuntu, Fedora, Chimera Linux |
| FOSS bootloader | yes |
| postmarketOS | |
| Category | testing |
| Pre-built images | no |
| Mainline | yes |
| Unixbench Whet/Dhry score | 1184.0 |
This device is marked as not booting.
Status: pmOS port hasn't been attempted yet
Status: pmOS port hasn't been attempted yet
| Primary Bootloader |
Works |
|---|---|
| Secondary Bootloader |
Works |
| Mainline |
Works |
| Internal Storage |
Works |
| SD card |
Works |
| USB Host | |
| USB Peripheral | |
| Display | |
| Keyboard | |
HDMI output
With https://patchwork.kernel.org/project/linux-riscv/cover/20230801101030.2040-1-keith.zhao@starfivetech.com/ applied on mainline you can get video output from the HDMI port, however the refreshing speed even on a TTY is really bad unless you run something "intensive" like neofetch in a continuous loop.
Users owning this device
- IonAgorria (Notes: 8GB v1.3B - OK)
See also
- VisionFive 2 - open source quad-core RISC-V dev board
- VisionFive 2 Single Board Computer Quick Start Guide
- VisionFive 2 Datasheet
- Main firmware source code repo (U-Boot SPL, OpenSBI, ...)
- Some basic info about the WIP Open Source GPU driver
- StarFive JH7110 SoC Upstream Status
- StarFive RISC-V DTS in Torvalds' tree
- W.I.P Chimera Linux packages for VisionFive 2
- W.I.P Chimera Linux image creation scripts for VisionFive 2