Jump to content

User:AppData 174/Sandbox

From postmarketOS Wiki

| status_usbnet = Y | status_flashing = Y | status_touch = Y | status_screen = P | status_wifi = N | status_xwayland = | status_fde = | status_mainline = N | status_battery = P | status_3d = | status_audio = N | status_bluetooth = N | status_camera = N | status_gps = N | status_mobiledata = | status_sms = | status_calls = | status = | status_otg = | status_nfc = - | status_usba = - | status_hdmidp = - | status_keyboard = | status_touchpad = | status_irtx = - | status_trustzone = | status_accel = | status_magnet = | status_light = | status_proximity = | status_hall = | status_barometer = | status_powersensor = | status_fossbootloader = | booting = yes | pmoskernel = 3.4.5 }}

Note Not to be confused with the LTE model, which has a Qualcomm SoC! (If you have a letter after the model number, you have the LTE model.)

Contributors

Users owning this device

How to enter flash mode

  • Download mode: While the device is turned off, hold Power + Home + Volume Down, and confirm the action by pressing Volume Up thereafter.
  • Recovery mode: While the device is turned off, hold Power + Home + Volume Up.

Installation

pmbootstrap init
pmbootstrap install
pmbootstrap flasher flash_rootfs
pmbootstrap flasher flash_kernel

Hardware Acceleration

Note Note: This is not tested and could not work.
  1. Open aports/device/testing/device-samsung-logan/APKBUILD and add mesa-egl to the depends
  2. Rebuild the device package: pmbootstrap build device-samsung-logan --force
  3. Run pmbootstrap install --add osk-sdl

However, the image will be much bigger than the system partition, so you will need to either flash it to another partition (--partition) or an SD card (--sdcard).

USB Internet

See USB Internet.

See also

/* Not yet */ -->