Vestel Venus V5 (vestel-teos)
Appearance

| This device is marked as not booting. |
| Manufacturer | Vestel |
|---|---|
| Name | Venus V5 |
| Codename | vestel-(teos) |
| Released | 2017 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm MSM8920 (Snapdragon 427) |
| Display | 5.0" HD IPS 294 PPI (720x1280) |
| Storage | 32 GB |
| Memory | 3 GB |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Android 7.1.2 |
Extended version The most recent supported version from the manufacturer. |
Android 7.1.2 |
| postmarketOS | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
Users owning this device
- Meterode (Notes: The Battery Socket On The Motherboard İs Broken)
Porting Information
A working TWRP recovery has been ported for the Vestel Venus V5 (TEOS)
- TWRP Version: v3.3.1-0
- Status: Stable without problems
For detailed instructions and download links, please refer to the XDA thread:
- [Vestel Venus V5 TWRP v3.3.1-0 on XDA Forums](https://xdaforums.com/t/vestel-venues-v5-teos-without-problems-twrp-v3-3-1-0.4780490/)
How to enter EDL mode
- With the device turned off, press and hold the Volume Up + Volume Down buttons simultaneously and plug the cable into the phone
How to flash
To restore or flash stock firmware via QFIL:
- Ensure your Qualcomm drivers are installed correctly and the device is detected as
Qualcomm HS-USB QDLoader 9008 - Open QFIL and select the correct programmer file (
prog_emmc_firehose_8917.mbn) - Load rawprogram and patch files
- Click Download and do not disconnect the cable
- [QFIL Installation Files (Google Drive)](https://drive.google.com/file/d/1B8X_jOufRCJXEnpJ-0O3DSRmYJAWQ7om/view?pli=1)
Additional Info
- Chipset: Qualcomm MSM8920 (Snapdragon 427)
- Display: 5.0" HD IPS 294 PPI (720x1280)
- Storage: 32 GB, microSD support
- Memory: 3 GB RAM