Vivo Y28L (vivo-pd1403l)
 |
This device is supported as part of a generic port. Refer to Vivo_CDP_Generic(vivo-cdp) for installation instructions and more information. |
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. Status: Attempting to port mainline, booted up successfully, a little buggy, some hw doesnt work yet. |
 Vivo Y28L, running Plasma Mobile DE in pmOS with MSM8916 Mainline Linux kernel! | |
| Manufacturer | Vivo |
|---|---|
| Name | Y28L |
| Codename | vivo-pd1403l |
| Model | Y28L (PD1403L) |
| Released | 2014 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 410 (MSM8916) |
| CPU |
4× 1.2 GHz Cortex‑A53 4× 1.4 GHz Cortex‑A53 |
| GPU | Adreno 306 @ 400 MHz |
| Display | 540 x 960 IPS @ 30 Hz, 4.7" |
| Storage | 8GB |
| Memory | 1GB |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 4.4 |
Extended version The most recent supported version from the manufacturer. |
Android 4.4 |
| FOSS bootloader | partial |
| postmarketOS | |
| Category | testing |
Pre-built images Whether pre-built images are available from the postmarketOS Installation page. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
6.12.0 |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
Unknown yet |
| Generic port | Vivo_CDP_Generic(vivo-cdp) |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Partial
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS... |
Works
|
SD card Also includes other external storage cards. |
Works
|
Battery Whether charging and battery level reporting work. |
Partial
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Partial
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Camera Flash |
Untested
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Broken
|
GPS |
Untested
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching. |
Partial
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Works
|
Magnetometer Sensor to measure the Earth's magnetism |
Untested
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Works
|
Proximity |
Untested
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Untested
|
Haptics |
Untested
|
Contributors
- User:Tikily Provides invaluable help and support in writing devicetree and driving the hardwares.
- User:Charisk Device owner, lk1st & lk2nd contributor, attempting to port mainline, and coding mainline dts with the help from User:Tikily.
Maintainers
Users owning this device
- Charisk (Notes: Mainlining)
How to enter flash mode
This device CANNOT get into Bootloader mode (Fastboot mode) by
$ adb reboot bootloader
So use hardware key combination instead. The key combination for the device is quite ordinary: Power button + Volume down button.
For recovery, the combination is Power button + Volume up button.
Installation
Bootloader Unlocking
First unlock bootloader by using modified fastboot tool for vivo:
For Fastboot tool from: https://github.com/Tikily/bbk_vivo_unlock
use modified fastboot tool to unlock bootloader
$ ./fastboot bbk unlock_vivo