Wiko Lenny 3 (wiko-lenny3)

From postmarketOS
(Redirected from Wiko Lenny3 (wiko-lenny3))


Note This device is still running on armhf, although the processor supports armv7. If you own it, change it and test it that way.


Icon WARNING: This device is not recommended for future use with postmarketOS due to its armhf architecture. Alpine Linux (the distribution that postmarketOS extends) has been considering dropping it.
In some cases, the processor of the device may support the armv7 architecture. If so, you can modify the device package and change the architecture accordingly.
Wiko Lenny 3
Wiko Lenny 3
Wiko Lenny 3
Manufacturer Wiko
Name Lenny 3
Codename wiko-lenny3
Released 2016
Category testing
Pre-built images no
Original software Android
Original version 6.0.1
postmarketOS kernel 3.18.19
Hardware
Chipset MediaTek MT6580M
CPU Quad-core 1.3 GHz Cortex-A7
GPU Mali-400 MP2
Display 720x1280
Storage 16 GB
Memory 1 GB
Architecture ARMhf
Type handset
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Works
Display
Works
WiFi
FDE
Mainline
Battery
3D Acceleration
Audio
Bluetooth
Camera
GPS
Mobile data
Internal storage
SMS
Calls
USB OTG
NFC
Sensors
Accelerometer
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Built-in DVB
Camera Flash
Keyboard
Touchpad
USB-A
HDMI/DP
Ir TX
Ir RX
Stylus
Memory Card
Haptics
Ethernet
FOSS bootloader


Contributors

Maintainer(s)

Device owners


How to enter flash mode

  • Start SP Flash Tool
  • Select the MT6580 scatter file
  • Check the partition to flash
  • Specify the location of the file to flash
  • Click Download button
  • Remove the battery from the device
  • Connect the USB cable
  • Flash process should start

How to enter recovery mode

  • Hold the Volume Up button, and then press the Power button

Links