Jump to content

Wiko Lenny 5

From postmarketOS Wiki
Wiko Lenny 5
Testing SXMO on Wiko Lenny 5
Testing SXMO on Wiko Lenny 5
Manufacturer Wiko
Name Lenny 5
Codename wiko-lenny5
Released 2018
Type handset
Hardware
Chipset MediaTek MT6580
CPU ARM Cortex-A7
1300 Mhz
GPU ARM Mali-400 MP2, 2 cores
Display 720x1440
Storage 16GB
Memory 1GB, 533Mhz
Architecture armv7
Software
Original software Android
Original version
The version the device was shipped with.
8.1
postmarketOS
Category testing
Pre-built images
Whether pre-built images are available here.
no
Features
Flashing
It is possible to flash the device with pmbootstrap flasher.
Works
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Works
Battery
Charging and battery level reporting works
Untested
Screen
Display works. Ideally with sleep mode and brightness control.
Works
Touchscreen
Untested
Multimedia
3D Acceleration
Untested
Audio
Audio playback, microphone, headset and buttons.
Untested
Camera
Untested
Connectivity
WiFi
Untested
Bluetooth
Untested
GPS
Untested
NFC
Near Field Communication
Untested
Modem
Calls
Untested
SMS
Untested
Mobile data
Untested
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Untested
USB OTG
USB On-The-Go or USB-C Role switching
Untested
Sensors
Accelerometer
Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile
Untested


Contributors

  • TojoRs

How to enter Recovery mode

  1. Switch off your device.
  2. Press and keep pushed Volume Up and Power for 10 seconds, then release Power button.
  3. While keeping Volume Up pushed, press once Power to switch on the device.
  4. You should now enter recovery mode.

How to enter fastboot mode

  1. Use the above method to enter Recovery mode.
  2. Use Volume up/down to navigate and select "Reboot to bootloader", press Power to validate.
  3. The device should now reboot in Fastboot mode.