Xiaomi Mi 5s Plus (xiaomi-natrium)

Xiaomi Mi 5s Plus

Xiaomi Mi 5s Plus running Plasma Mobile
Manufacturer	Xiaomi
Name	Mi 5s Plus
Codename	xiaomi-natrium
Released	2016
Type	handset
Hardware
Chipset	Qualcomm Snapdragon 821 (MSM8996Pro)
CPU	2x2.35 GHz Kryo & 2x2.2 GHz Kryo
GPU	Adreno 530
Display	1080x1920 IPS LCD
Storage	UFS 2.0 64/128GB
Memory	4/6 GB
Architecture	aarch64
Software
Original software	Android (MIUI)
Original version	6.0 (MIUI 8.2)
Extended version	8.0
postmarketOS
Category	testing
Pre-built images	no
Mainline	yes

Features

Flashing	Works
USB Networking	Works
Internal storage
SD card
Battery	Partial
Screen	Works
Touchscreen	Works
Multimedia
3D Acceleration	Works
Audio	Partial
Camera	Broken
Camera Flash
IR TX	Broken
Connectivity
WiFi	Partial
Bluetooth	Works
GPS
NFC	Works
Modem
Calls
SMS
Mobile data
Miscellaneous
FDE	Works
USB OTG	Works
HDMI/DP
Sensors
Accelerometer	Broken
Magnetometer
Ambient Light
Proximity
Hall Effect
Haptics
Barometer

This device is based on the Snapdragon 821. See the SoC page for common tips, guides and troubleshooting steps

Contributors

• AlecJY

Users owning this device

• AlecJY
• Crystalast-29 (Notes: sharp panel is working on "natrium-sharp-panel" branch)

How to enter flash mode

Power off the device, then press and hold Power + Volume Down together for a few seconds.

Installation

Follow the installation guide to build and install.

What's not working

• Cellular
• Camera
• GPS
• Sensors
• IR
• Sharp panel varient, but JDI panel varient works good
• WiFi is unstable and the signal is poor (in some cases)
• Built-in speakers and microphone, only headphone jack works

Current Progress

IR

The IR led can be lighted up with ir-ctl tool. Currently not test with real IR receivers.

• kernel

Sharp panel varient

It seems that there is no obvious problem. If you own a Mi 5s Plus with a Sharp panel, you can try this version.

• pmaports
• kernel

See also

• pmaports!3128 Initial merge request