Jump to content

Xiaomi POCO M3 Pro / Redmi Note 10 5G / Redmi Note 10T / Redmi Note 11 SE 5G (xiaomi-camellia)

From postmarketOS Wiki
Xiaomi POCO M3 Pro
Redmi Note 10 5G
Redmi Note 10T
Redmi Note 11 SE 5G
Xiaomi POCO M3 Pro
Xiaomi POCO M3 Pro
Manufacturer Xiaomi
Name POCO M3 Pro
Redmi Note 10 5G
Redmi Note 10T
Redmi Note 11 SE 5G
Codename xiaomi-camellia
Released 2021/2022
Type handset
Hardware
Chipset MediaTek Dimensity 700 (MT6833)
Display 1080x2400 IPS LCD 90HZ
Storage 64/128 GB
Memory 4/6 GB
Architecture aarch64
Software
Original software
The software and version the device was shipped with.
Android (MIUI) 12
Extended version
The most recent supported version from the manufacturer.
Android (MIUI)
FOSS bootloader no
postmarketOS
Category testing
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
yes
pmOS kernel
The kernel version that runs on the device's port.
6.18-rc1
Features
Flashing
Whether it is possible to flash the device with pmbootstrap flasher.
Works
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Broken
Internal storage
eMMC, SD cards, UFS...
Broken
SD card
Also includes other external storage cards.
Partial
Battery
Whether charging and battery level reporting work.
Broken
Screen
Whether the display works; ideally with sleep mode and brightness control.
Partial
Touchscreen
Broken
Multimedia
3D Acceleration
Broken
Audio
Audio playback, microphone, headset and buttons.
Broken
Camera
Broken
Camera Flash
Broken
IR TX
Untested
Connectivity
WiFi
Broken
Bluetooth
Broken
GPS
Broken
NFC
Near Field Communication
Broken
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Broken
USB OTG
USB On-The-Go or USB-C Role switching.
Broken
HDMI/DP
Video and audio output with HDMI or DisplayPort.
Broken
Fingerprint
Fingerprint reader.
Untested
Sensors
Accelerometer
Handles automatic screen rotation in many interfaces.
Broken
Ambient Light
Measures the light level; used for automatic screen dimming in many interfaces.
Broken
Proximity
Broken
Haptics
Broken

Contributors

Users owning this device

  • EvilSoCute (Notes: USB-C port isnt appearing in the pipa's dmesg, sdcard errors out, clock driver boom boom.)
  • Panic (Notes: 6/128)

Know your variant

Model Codename Model Number Supported?
POCO M3 Pro camellian
  • M2103K19PG
  • M2103K19PI
  • M2103K19PY
Y
Redmi Note 10 5G (Global) camellian
  • M2103K19G
N
Redmi Note 10 5G (China) camellia
  • M2103K19C
N
Redmi Note 10T (India) camellia
  • M2103K19I
N
Redmi Note 10T (Russia) camellian
  • M2103K19Y
N
Redmi Note 11 SE 5G (China) camellia - N

The current state of the device

Boots with uniLoader and postmarketOS edge.

Mainline kernel boots at cpu0 with a framebuffer display, brings up secondary cpus. Then it enters initramfs and cant mount anythin cuz

1. No UFS support currently.

2. Pinctrl and SD card support present in the device tree. It sees the sdcard but errors out and fails to mount. Then it falls into the debug shell.

See also