Xiaomi Poco M3 Pro 5G (xiaomi-camellia)
Appearance
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. Status: Clock driver making the kernel panic |
|
Xiaomi Poco M3 Pro 5G | |
| Manufacturer | Xiaomi |
|---|---|
| Name | Poco M3 Pro 5G |
| Codename | xiaomi-camellia |
| Model | ne znau |
| Released | 2021 |
| Type | handset |
| Hardware | |
| Chipset | MediaTek Dimensity 700 5G (MT6833) |
| CPU |
Octa-core (6x2.0 GHz Cortex-A55 2x2.2 GHz Cortex-A76) |
| GPU | Mali-G57 MC2 |
| Display | 1080 x 2400 IPS LCD 90HZ |
| Storage | 64GB/128GB |
| Memory | 4GB/6GB |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Android (MIUI) 12 |
Extended version The most recent supported version from the manufacturer. |
Android (MIUI) |
| FOSS bootloader |
- |
| postmarketOS | |
| Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
6.18-rc1 |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
0.0 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Broken
|
Internal storage eMMC, SD cards, UFS... |
Broken
|
SD card Also includes other external storage cards. |
Partial
|
Battery Whether charging and battery level reporting work. |
Broken
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Partial
|
Touchscreen |
Broken
|
| Multimedia | |
3D Acceleration |
Broken
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Camera Flash |
Broken
|
| Connectivity | |
WiFi |
Broken
|
Bluetooth |
Broken
|
Ethernet |
Broken
|
GPS |
Broken
|
NFC Near Field Communication |
Broken
|
| Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Broken
|
USB OTG USB On-The-Go or USB-C Role switching. |
Broken
|
HDMI/DP Video and audio output with HDMI or DisplayPort. |
Broken
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Broken
|
Magnetometer Sensor to measure the Earth's magnetism |
Broken
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Broken
|
Proximity |
Broken
|
Haptics |
Broken
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Broken
|
Contributors
- evilMyQueen (wiki page and a mainliner of the device)
Users owning this device
- EvilSoCute (Notes: USB-C port isnt appearing in the pipa's dmesg, sdcard errors out, clock driver boom boom.)
The current state of the device
Boots with uniLoader and postmarketOS edge.
Mainline kernel boots at cpu0 with a framebuffer display, brings up secondary cpus. Then it enters initramfs and cant mount anythin cuz 1. No UFS support currently. 2. Pinctrl and SDCard support present in the device tree. It sees the sdcard but errors out and fails to mount. Then it falls into the debug shell.
See also
linux kernel mainline fork/ uniLoader bootshim