Xiaomi Redmi 2 (xiaomi-wt88047)

From postmarketOS
Jump to navigation Jump to search
Xiaomi Redmi 2
[[|200px|alt=]]
Manufacturer Xiaomi
Name Redmi 2
Codename xiaomi-wt88047 (wingtech-wt88047)
Released 2015
Category testing
Original software MIUI 6.0 (Android 4.4.4)
Hardware
Chipset Qualcomm MSM8916 Snapdragon 410
CPU Quad-core 1.2 GHz Cortex-A53
GPU Adreno 306
Display 720 x 1280
Storage 8 GB / 16 GB
Memory 1 GB / 2 GB
Architecture aarch64
Features
USB Networking
Works
Flashing
Works
Touchscreen
Works
Display
Works
WiFi
Works
Xwayland
Works
FDE
Works
Mainline
Works
Battery
3D Acceleration
Works
Accelerometer
Works
Audio
Works
Bluetooth
Works
Camera
GPS
Mobile data
Works
SMS
Works
Calls
Works
USB OTG



Contributors

Users owning this device


How to enter flash mode

  • Fastboot: Power on the device with both Power and Volume Down buttons.
  • lk2nd Fastboot: Power on the device. After it vibrates, hold Volume Down.
  • lk2nd Recovery: Power on the device. After it vibrates, hold Volume Up.

Installation

  1. Make sure you have latest firmware flashed. Follow the LineageOS installation guide until (including) Updating firmware.
  2. Check if you have wt88047 or wt86047 (explained in the LineageOS installation guide in Updating firmware).
  3. Install lk2nd. Although Xiaomi already provides a Fastboot interface, lk2nd contains various quirks for booting mainline.
  4. Follow the Installation guide. (Flash from lk2nd Fastboot, not the stock Fastboot.)
    • If you want to use the modem, select the mainline-modem-<model> kernel, where model is either wt88047 or wt86047, as checked above.

Audio

See Qualcomm_Snapdragon_410_(MSM8916)#Audio.

Modem

See Qualcomm_Snapdragon_410_(MSM8916)#Modem.

See also