Xiaomi Redmi K30 5G (picasso)
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. Status: porting |
|
Xiaomi Redmi K30 5G Xiaomi Redmi K30 5G | |
| Manufacturer | Xiaomi |
|---|---|
| Name | Redmi K30 5G |
| Codename | picasso |
| Model | M2001G7AE,M2001G7AC |
| Released | 2020 |
| Pre-released | 2019 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 765G (SM7250) |
| CPU |
Octa-core (1x 2.4 GHz Kryo 475 Prime 1x 2.2 GHz Kryo 475 Gold 6x 1.8 GHz Kryo 475 Silver) |
| GPU | Adreno 620 |
| Display | 1080 x 2400 IPS LCD @ 120 Hz, 20:9, 6.67" |
| Storage | 64/128/256 GB |
| Memory | 6/8 GB |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 10 |
Extended version The most recent supported version from the manufacturer. |
Android 11 |
| Optional software | 3rd part AOSP android 16 |
| FOSS bootloader | no |
| postmarketOS | |
| Category | downstream |
Pre-built images Whether pre-built images are available from the postmarketOS Installation page. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
Downstream: 4.19.314 |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
0.0 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Untested
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Untested
|
Internal storage eMMC, SD cards, UFS... |
Untested
|
SD card Also includes other external storage cards. |
Untested
|
Battery Whether charging and battery level reporting work. |
Untested
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Untested
|
Touchscreen |
Untested
|
Keyboard Whether the built-in physical keyboard works. |
Untested
|
Touchpad Whether the built-in touchpad works. |
Untested
|
Stylus |
Untested
|
| Multimedia | |
3D Acceleration |
Untested
|
Built-in DVB TV tuner/DVB device |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Camera Flash |
Untested
|
IR TX |
Untested
|
IR RX |
Untested
|
| Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
Ethernet |
Untested
|
GPS |
Untested
|
NFC Near Field Communication |
Untested
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB-A Whether the full-sized USB-A port works. |
Untested
|
SATA/eSATA |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching. |
Untested
|
HDMI/DP Video and audio output with HDMI or DisplayPort. |
Untested
|
Fingerprint Fingerprint reader. |
Untested
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Magnetometer Sensor to measure the Earth's magnetism |
Untested
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Untested
|
Proximity |
Untested
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Untested
|
Haptics |
Untested
|
Barometer Sensor to measure air pressure |
Untested
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Untested
|
Contributors
Maintainers
- User:Park.yu Porting is in progress
Users owning this device
- Park.yu (Notes: proting mainline in progress)
UART
Voltage:1.8v,baud rate : 115200
-
UART Location
Panel
nt36672c (panel + touch screen)
How to enter flash mode
quirks: This device uses a typical Qualcomm bootloader, which requires your boot.img to be in a proprietary Qualcomm format (with a custom Qualcomm DTB appended to the end). To fix these odd issues, you either need to use a second-stage bootloader like U-Boot or lk2nd, or find a way to bypass these verifications when repacking your boot.img (lk2nd porting is in progress)
 |
Add step-by-step instructions for enabling flash mode. |
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernelto flash the kernel - Run
pmbootstrap flasher flash_rootfs
See also
https://wiki.postmarketos.org/wiki/Xiaomi_Mi_10_Lite_5G_(xiaomi-monet) mi 10 lite 5g is also using sm7250