Xiaomi Redmi K70 Pro (xiaomi-manet)
Appearance
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
|
Redmi K70 Pro Redmi K70 Pro | |
| Manufacturer | Xiaomi |
|---|---|
| Name | Redmi K70 Pro |
| Codename | xiaomi-manet |
| Model | 23117RK66C |
| Released | 2023 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 8 Gen 3 (SM8650-AB) |
| CPU |
8 core (1-3-2-2) 3.3 GHz Cortex-X4 3.15 GHz Cortex-A720 2.96 GHz Cortex-A720 2.27 GHz Cortex-A520 |
| GPU | 903 MHz Adreno 750 |
| Display | 1440x3200 AMOLED |
| Storage | 256GB/512GB/1TB |
| Memory | 12GB/16GB/24GB (special editions) |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Android (HyperOS) 14 (HyperOS 1) |
Extended version The most recent supported version from the manufacturer. |
Android (HyperOS) 15 (HyperOS 2.2) |
| FOSS bootloader | no |
| postmarketOS | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
6.10.0-rc5 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS... |
Works
|
Battery Whether charging and battery level reporting work. |
Broken
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Broken
|
| Multimedia | |
3D Acceleration |
Broken
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Camera Flash |
Broken
|
IR TX |
Broken
|
| Connectivity | |
WiFi |
Broken
|
Bluetooth |
Broken
|
GPS |
Broken
|
NFC Near Field Communication |
Broken
|
| Modem | |
Calls |
Broken
|
SMS |
Broken
|
Mobile data |
Broken
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Broken
|
USB OTG USB On-The-Go or USB-C Role switching. |
Broken
|
HDMI/DP Video and audio output with HDMI or DisplayPort. |
Broken
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Broken
|
Magnetometer Sensor to measure the Earth's magnetism |
Broken
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Broken
|
Proximity |
Broken
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Broken
|
Haptics |
Broken
|
Barometer Sensor to measure air pressure |
Broken
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Broken
|
Contributors
- BotchedRPR
Users owning this device
- BotchedRPR (Notes: Wired up UART. Mainline adventures when bored)
How to enter flash mode
- Fastboot mode: Hold and while the phone is off
- Recovery mode: Hold and while the phone is off.
Installation
| WARNING: Xiaomi actively tries to make unlocking the bootloader harder. Especially on this device (which was only released in Mainland China) it's practically impossible without paying for an unofficial method. Beware. |
Packages not merged upstream yet.