Xiaomi Redmi Note 12 Pro (4G) (xiaomi-sweet_k6a)
Appearance
🚧 | This page is a work-in-progress. Some information contained within may be inaccurate or incomplete. |
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories.
This means that it cannot be selected in pmbootstrap.
Status: -
This means that it cannot be selected in pmbootstrap.
Status: -
Manufacturer | Xiaomi |
---|---|
Name | Redmi Note 12 Pro (4G) |
Codename | xiaomi-sweet_k6a |
Released | 2023 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon 732G (SM7150-AC) |
CPU |
Octa-core (2x2.3 GHz Kryo 470 Gold 6x1.8 GHz Kryo 470 Silver) |
GPU | Adreno 618 |
Display | 1080 x 2400, 20:9, 6.67", AMOLED, 120Hz, 450/1200 nits |
Storage | 128/256 GB |
Memory | 6/8 GB |
Architecture | aarch64 |
Software | |
Original software | Android (MIUI) |
Original version The version the device was shipped with. |
11 (MIUI 13) |
Extended version The most recent supported version from the manufacturer. |
13 (HyperOS 1.0) |
FOSS bootloader | partial |
postmarketOS | |
Category | testing |
Pre-built images Whether pre-built images are available here. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS, ... |
Works
|
SD card Also includes other external storage cards |
Works
|
Battery Charging and battery level reporting works |
Partial
|
Screen Display works. Ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Partial
|
Camera |
Broken
|
Camera Flash |
Works
|
IR TX |
Broken
|
Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
GPS |
Broken
|
NFC Near Field Communication |
Works
|
Modem | |
Calls |
Partial
|
SMS |
Works
|
Mobile data |
Works
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Works
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Works
|
Magnetometer Sensor to measure magnetism |
Works
|
Ambient Light |
Works
|
Proximity |
Broken
|
Haptics |
Broken
|
Secondary Bootloader It is possible to chainload U-Boot from stock bootloader. |
Works
|
---|---|
Mainline Latest versions of U-Boot are not broken and it is possible to use them. |
Broken
|
Internal Storage It is possible to boot from internal storage (e.g. eMMC or UFS). |
Partial
|
SD card It is possible to boot from SD card. |
Broken
|
USB Host It is possible to boot from a USB storage or connect a keyboard. |
Broken
|
USB Peripheral It is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode. |
Partial
|
Display |
Works
|
Buttons It is possible to navigate in boot menu or grub with volume and power buttons. |
Works
|
This device is based on the Snapdragon 732G. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
Maintainer(s)
- vilez
- Largely the sm7150-mainline team
Users owning this device
- Vilez (Notes: LineageOS, attempting pmos with mainline kernel)
Port status
WARNING: THIS PORT WILL NOT WORK ON THE Redmi Note 10 Pro (sweet). IF YOU TRY FLASHING IT, YOU WILL END WITH A BRICK!. SEE REDMI NOTE 10 PRO PAGE INSTEAD |
Mainline kernel boots but touchscreen dont work properly
Flash modes
- Fastboot mode:
adb reboot bootloader
)
+ ( - Fastbootd mode:
adb reboot fastboot
- Recovery mode:
adb reboot recovery
,fastboot reboot recovery
) + (
Other
- Mainline kernel fork: https://github.com/sm7150-mainline/linux
- Pmaports fork: https://github.com/sm7150-mainline/pmaports