Xiaomi Redmi Note 13 Pro 5G/ POCO X6 5G (xiaomi-garnet)
| This device is marked as not booting. |
 POCO X6 5G and Redmi Note 13 Pro 5G | |
| Manufacturer | Xiaomi |
|---|---|
| Name |
Redmi Note 13 Pro 5G POCO X6 5G |
| Codename | xiaomi-garnet |
| Released | 2024 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 7s Gen 2 (SM7435) |
| CPU |
Octa-core (1×2.8 GHz 3×2.4 GHz 4×2.0 GHz) |
| GPU | Adreno 710 |
| Display | 2712×1220, 6.67″ AMOLED, 120 Hz, 446 ppi |
| Storage | 128/256/512 GB UFS 2.2 |
| Memory | 8/12/16 GB LPDDR4x |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 13 (MIUI 14) |
Extended version The most recent supported version from the manufacturer. |
Android 16 (HyperOS 3) |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
Contributors
- SayaAEP – initial page creator
Maintainer(s)
None at the moment
Users owning this device
- Huaji2369 (Notes: Main phone (Redmi variant (12/512)))
- Marineboy1 (Notes: Daily)
- Maydoxx1 (Notes: PixelOS Android 16)
- Rock Pie (Notes: Main phone (POCO variant (12/256)))
- SayaAEP (Notes: 12/256, (POCO variant), EvolutionX 11.9 cult worshippers since 9.x)
How to enter flash mode
- Power off the device
- Hold + to enter Fastboot mode
Installation
 |
WARNING: This device has not been ported to postmarketOS yet. Tutorial below are unrelated. Contributions are welcome! |
- Install pmbootstrap
- Run
pmbootstrap init, select vendorxiaomiand devicegarnet - Complete the rest of the setup according to your preferences
- Build the root filesystem:
pmbootstrap install - Reboot the device into fastboot mode
- Flash the kernel and rootfs:
pmbootstrap flasher flash_kernel && pmbootstrap flasher flash_rootfs
- (Optional) Erase the DTBO partition:
fastboot erase dtbo - Reboot the device:
fastboot reboot